MAPLE fault codes
Coverage shown is Geely data: 6,743 codes · 99 vehicle records · 0 ECU records · 0 live-data parameters.
MAPLE shares fault-code data with Geely. Data may not cover MAPLE-specific systems.
Codes 6,743
| Code | Description | Brands | System |
|---|---|---|---|
| U1005 | CAN network | 24 | Network |
| U1006 | Low voltage detected | 24 | Network |
| U1007 | General fault on suspension and wheel CAN network | 23 | Network |
| U1008 | General fault on suspension and wheel CAN network | 29 | Network |
| U1009 | ECU silent on suspension and wheel CAN network | 27 | Network |
| U1012 | Loss of serial communications for class 2 devices | 26 | Network |
| U1013 | Control Module Not Coded | 26 | Network |
| U1014 | Loss of serial communications for class 2 devices | 25 | Network |
| U1016 | Control module for ABS brakes: implausible message received | 23 | Network |
| U1017 | Loss of serial communications for class 2 devices | 22 | Network |
| U1018 | Loss of serial communications for class 2 devices | 17 | Network |
| U1019 | Control module for instrument cluster: missing signal for oil level/temperature; Short to plus | 20 | Network |
| U1073 | J1850 SCP Engine Coolent Invalid - Instr Clstr | 23 | Network |
| U1100 | Engine CAN timeout | 31 | Network |
| U1101 | Component protection active | 31 | Network |
| U1102 | F-CAN malfunction (bus off) | 30 | Network |
| U1103 | Production mode active | 31 | Network |
| U1104 | Transport mode | 30 | Network |
| U1105 | No communication with the steering angle sensor | 25 | Network |
| U1106 | Customer service mode active | 23 | Network |
| U1107 | Lost communication with hybrid power management electronic control unit 1 | 24 | Network |
| U1108 | No communication with engine control unit | 23 | Network |
| U1109 | No communication with automatic transmission electronic control unit | 23 | Network |
| U1110 | Communication failure with the transmission electronic control unit | 28 | Network |
| U1111 | Lost communication (IDM) | 30 | Network |
| U1112 | Function restriction due to implausible message(s) | 30 | Network |
| U1113 | Valid except model 177 | 26 | Network |
| U1114 | Inter-system CAN | 22 | Network |
| U1116 | KOS CAN timeout/Not equipped | 25 | Network |
| U1117 | Lost communication (ABS) | 25 | Network |
| U1120 | Lost wheel distance message | 24 | Network |
| U1121 | Communication failure with electric steering ECU | 29 | Network |
| U1122 | Data bus implausible message | 26 | Network |
| U1123 | Lost communication with LIN ECU 3 | 26 | Network |
| U1124 | SAS (CAN message) | 26 | Network |
| U1125 | Yaw rate sensor signal fault | 25 | Network |
| U1126 | EPS (CAN message) | 23 | Network |
| U1127 | 4WD (CAN message) | 22 | Network |
| U1128 | Meter (CAN message) | 24 | Network |
| U1129 | ETACS (CAN message) | 21 | Network |
| U1130 | CAN network | 20 | Network |
| U1131 | Display (CAN message) | 21 | Network |
| U1132 | SRS airbag (CAN message) | 17 | Network |
| U1133 | LIN network | 23 | Network |
| U1136 | KOS (CAN message) | 22 | Network |
| U1190 | Loss of serial communications for class 2 devices | 14 | Network |
| U1200 | Loss of serial communications for class 2 devices | 23 | Network |
| U1201 | Communication error | 21 | Network |
| U1202 | MCU CAN communication error 2 | 20 | Network |
| U1203 | Loss of serial communications for class 2 devices | 23 | Network |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.