Fault code lookup

NetworkU1124

Serious

Severity: Serious - have it checked soon

SAS (CAN message)

26 brands affected · Description from Toyota data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 26

BrandCodeDescriptionSystem
Mercedes-BenzU1124No description available Network
BYDU1124No description available Network
CheryU1124No description available Network
ChryslerU1124HCP DTC (-00) (lost communication with LIN ECU 4) cannot be present BrandNetwork
DaewooU1124Loss of serial communications for class 2 devices BrandNetwork
DaihatsuU1124Lost communication with right headrest control ECU BrandNetwork
DFFSU1124Vehicle CAN message 0x3F1 receiving failure BrandNetwork
DFFXU1124No description available Network
EOBDU1124Veri yolu BrandNetwork
GeelyU1124No description available Network
GMU1124Loss of serial communications for class 2 devices BrandNetwork
Great WallU1124No description available Network
HafeiU1124No description available Network
HoldenU1124No description available Network
MahindraU1124No description available Network
MitsubishiU1124No description available Network
OpelU1124Loss of serial communications for class 2 devices BrandNetwork
PeroduaU1124Lost communication with right headrest control ECU BrandNetwork
PeugeotU1124No description available Network
ProtonU1124No description available Network
SaabU1124Loss of serial communications for class 2 devices BrandNetwork
Maxus (SAIC)U1124DTC configuration: Lost communication with GW_ABS_ESP BrandNetwork
MG (SAIC)U1124DTC configuration: Lost communication with GW_ABS_ESP BrandNetwork
SmartU1124No description available Network
SprinterU1124No description available Network
ToyotaU1124SAS (CAN message) BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Related codes

Browse Uxxx codes or U112xx codes.

OpenDTC - independent fault code reference