Fault code lookup

NetworkU1019

Serious

Severity: Serious - have it checked soon

Control module for instrument cluster: missing signal for oil level/temperature; Short to plus

20 brands affected · Description from Volkswagen data.

Key terms: Control module: a small computer that runs one part of the car

Safety: This code relates to engine oil pressure or oil level. Low oil pressure can destroy the engine within minutes.

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 20

BrandCodeDescriptionSystem
Ashok Leyland CVU1019No description available Network
BAIC MotorU1019CAN wheel speed error - rear right BrandNetwork
Mercedes-BenzU1019No description available Network
CheryU1019Lost communication with airbag module BrandNetwork
DaewooU1019Loss of serial communications for class 2 devices BrandNetwork
EOBDU1019Műszerfal vezérlőmodul BrandNetwork
FordU1019No description available Network
GeelyU1019Rear Right Wheel Speed CAN Signal Fault BrandNetwork
GMU1019Loss of serial communications for class 2 devices BrandNetwork
Great WallU1019Rear right wheel speed signal error on CAN bus BrandNetwork
HoldenU1019No description available Network
HyundaiU1019No description available Network
MazdaU1019No description available Network
OpelU1019Loss of serial communications for class 2 devices BrandNetwork
PeugeotU1019No description available Network
SaabU1019Loss of serial communications for class 2 devices BrandNetwork
SmartU1019No description available Network
SprinterU1019No description available Network
TataU1019No description available Network
VolkswagenU1019Control module for instrument cluster: missing signal for oil level/temperature; Short to plus BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 1

These 7-character codes are manufacturer-specific variants of U1019 and may be reported by some scan tools.

BrandCodeDescriptionSystem
BAIC MotorU101900DTC status during last driving cycle BrandNetwork

6Related codes

Browse Uxxx codes or U101xx codes.

OpenDTC - independent fault code reference