Fault code lookup

NetworkU1010

Serious

Severity: Serious - have it checked soon

Lost communication with the powertrain interface ECU

29 brands affected · Description from Toyota data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 29

BrandCodeDescriptionSystem
Ashok Leyland CVU1010No description available Network
Mercedes-BenzU1010No description available Network
CheryU101014 communication error between BMU and BMS BrandNetwork
DaewooU1010Loss of serial communications for class 2 devices BrandNetwork
DFFSU1010Control unit (CAN) failure BrandNetwork
DFXKU1010control unit BrandNetwork
EOBDU1010Juhtseade BrandNetwork
GMU1010Loss of serial communications for class 2 devices BrandNetwork
Great WallU1010Battery sensor communication fault BrandNetwork
HoldenU1010Electronic Control Unit Performance BrandNetwork
HyundaiU1010No description available Network
IsuzuU1010No description available Network
Land RoverU1010No description available Network
MahindraU1010No description available Network
MaseratiU1010No description available Network
MitsubishiU1010PHEV ECU Parity/Toggle bit error BrandNetwork
NissanU1010No description available Network
OpelU1010Loss of serial communications for class 2 devices BrandNetwork
PeugeotU1010No description available Network
PorscheU1010No description available Network
ProtonU1010PHEV ECU Parity/Toggle bit error BrandNetwork
SaabU1010Loss of serial communications for class 2 devices BrandNetwork
MG (SAIC)U1010Init Error BrandNetwork
SmartU1010No description available Network
SprinterU1010No description available Network
SuzukiU1010CONTROL UNIT (CAN) BrandNetwork
TataU1010No description available Network
ToyotaU1010Lost communication with the powertrain interface ECU BrandNetwork
VolkswagenU1010No description available Network

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 1

These 7-character codes are manufacturer-specific variants of U1010 and may be reported by some scan tools.

BrandCodeDescriptionSystem
SsangYongU101087CAN communication: Electric Heating, Ventilation, and Air Conditioning (EHVC) message not received BrandNetwork

6Related codes

Browse Uxxx codes or U101xx codes.

OpenDTC - independent fault code reference