Fault code lookup

NetworkU1201

Serious

Severity: Serious - have it checked soon

Communication error

21 brands affected · Description from Toyota data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 21

BrandCodeDescriptionSystem
BYDU1201Yaw rate sensor parity error BrandNetwork
CheryU1201Yaw rate sensor parity error BrandNetwork
DaewooU1201Loss of serial communications for class 2 devices BrandNetwork
DFFXU1201Yaw rate sensor parity error BrandNetwork
EOBDU1201Veri yolu BrandNetwork
GeelyU1201Yaw rate sensor parity error BrandNetwork
GMU1201Loss of serial communications for class 2 devices BrandNetwork
Great WallU1201Yaw rate sensor parity error BrandNetwork
HafeiU1201Yaw rate sensor parity error BrandNetwork
HondaU1201No description available Network
HyundaiU1201No description available Network
IsuzuU1201No description available Network
MahindraU1201No description available Network
MitsubishiU1201Vehicle speed signal error BrandNetwork
PeugeotU1201No description available Network
ProtonU1201Vehicle speed signal error BrandNetwork
SaabU1201Loss of serial communications for class 2 devices BrandNetwork
MG (SAIC)U1201EEPROM Error BrandNetwork
SmartU1201No description available Network
SubaruU1201No description available Network
ToyotaU1201Communication error BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 2

These 7-character codes are manufacturer-specific variants of U1201 and may be reported by some scan tools.

BrandCodeDescriptionSystem
SsangYongU120101Brake Safety Control (BSC) communication failure BrandNetwork
SsangYongU120188P-CAN Bus-off BrandNetwork

6Related codes

Browse Uxxx codes or U120xx codes.

OpenDTC - independent fault code reference