Fault code lookup

NetworkU1114

Serious

Severity: Serious - have it checked soon

Inter-system CAN

22 brands affected · Description from Toyota data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 22

BrandCodeDescriptionSystem
Mercedes-BenzU1114No description available Network
BYDU1114TPMS CAN timeout/Not equipped BrandNetwork
CheryU1114TPMS CAN timeout/Not equipped BrandNetwork
DaewooU1114Loss of serial communications for class 2 devices BrandNetwork
DFFSU1114CCAN_Radar0F2_ACCState message is invalid BrandNetwork
DFFXU1114TPMS CAN timeout/Not equipped BrandNetwork
EOBDU1114Komponentskydd BrandNetwork
GeelyU1114TPMS CAN timeout/Not equipped BrandNetwork
GMU1114Loss of serial communications for class 2 devices BrandNetwork
Great WallU1114TPMS CAN timeout/Not equipped BrandNetwork
HafeiU1114TPMS CAN timeout/Not equipped BrandNetwork
HoldenU1114Lost Communication With Left Headlamp Leveling Actuator BrandNetwork
MahindraU1114No description available Network
MitsubishiU1114FACU CAN timeout BrandNetwork
NissanU1114No description available Network
OpelU1114Loss of serial communications for class 2 devices BrandNetwork
PeugeotU1114No description available Network
ProtonU1114FACU CAN timeout BrandNetwork
SaabU1114Loss of serial communications for class 2 devices BrandNetwork
SmartU1114No description available Network
SprinterU1114No description available Network
ToyotaU1114Inter-system CAN BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 1

These 7-character codes are manufacturer-specific variants of U1114 and may be reported by some scan tools.

BrandCodeDescriptionSystem
SsangYongU111402CAN communication: ICM_303 communication error - timeout BrandNetwork

6Related codes

Browse Uxxx codes or U111xx codes.

OpenDTC - independent fault code reference