Fault code lookup

NetworkU1118

Serious

Severity: Serious - have it checked soon

Communication failure with Built-in System Interface (BSI)

23 brands affected · Description from Toyota data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 23

BrandCodeDescriptionSystem
Mercedes-BenzU1118Valid except code 567 BrandNetwork
DaewooU1118Loss of serial communications for class 2 devices BrandNetwork
DaihatsuU1118Lost communication with rear radar sensor BrandNetwork
DFFSU1118CAN and BCM communication timeout BrandNetwork
DFFXU1118CAN and SRS communication timeout BrandNetwork
EOBDU1118Dataset saknas BrandNetwork
GMU1118Loss of serial communications for class 2 devices BrandNetwork
HoldenU1118Lost Communication with Radio BrandNetwork
HyundaiU1118No description available Network
MahindraU1118No description available Network
MaseratiU1118Lost Engine Variant Message BrandNetwork
MitsubishiU11184WD CAN timeout BrandNetwork
NissanU1118No description available Network
OpelU1118Loss of serial communications for class 2 devices BrandNetwork
PeroduaU1118Lost communication with rear radar sensor BrandNetwork
PeugeotU1118No description available Network
ProtonU11184WD CAN timeout BrandNetwork
SaabU1118Loss of serial communications for class 2 devices BrandNetwork
SmartU1118Valid except code 567 BrandNetwork
SprinterU1118Valid except code 567 BrandNetwork
SuzukiU1118LOST COMM (AV C/U) BrandNetwork
TataU1118No description available Network
ToyotaU1118Communication failure with Built-in System Interface (BSI) BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 11

These 7-character codes are manufacturer-specific variants of U1118 and may be reported by some scan tools.

BrandCodeDescriptionSystem
Mercedes-BenzU111800The traction system has detected implausible data 1. BrandNetwork
PorscheU111800No description available Network
SsangYongU111802CAN communication: MCU_1E1 communication error - timeout BrandNetwork
Mercedes-BenzU111804The traction system has detected implausible data 1. There is an internal fault. BrandNetwork
Mercedes-BenzU111809The traction system has detected implausible data 1. There is a component fault. BrandNetwork
Mercedes-BenzU111844The traction system has detected implausible data 1. There is an error in the data memory. BrandNetwork
Mercedes-BenzU111864The traction system has detected implausible data 1. There is an implausible signal. BrandNetwork
Mercedes-BenzU1118EAReceive of data not finished within defined time BrandNetwork
Mercedes-BenzU1118ECFailure is set when PRW functionality developed by 3rd party tries to access memory region outside of its allocated memory BrandNetwork
Mercedes-BenzU1118FAThe traction system has detected implausible data 1. BrandNetwork
Mercedes-BenzU1118FDThe traction system has detected implausible data 1. BrandNetwork

6Related codes

Browse Uxxx codes or U111xx codes.

OpenDTC - independent fault code reference