Mahindra fault codes
3,424 codes · 41 vehicle records · 0 ECU records · 0 live-data parameters
Codes 3,424
| Code | Description | Brands | System |
|---|---|---|---|
| U1107 | Lost communication with hybrid power management electronic control unit 1 | 24 | Network |
| U1108 | No communication with engine control unit | 23 | Network |
| U1109 | No communication with automatic transmission electronic control unit | 23 | Network |
| U1110 | Communication failure with the transmission electronic control unit | 28 | Network |
| U1111 | Lost communication (IDM) | 30 | Network |
| U1112 | Function restriction due to implausible message(s) | 30 | Network |
| U1113 | Valid except model 177 | 26 | Network |
| U1114 | Inter-system CAN | 22 | Network |
| U1117 | Lost communication (ABS) | 25 | Network |
| U1118 | Communication failure with Built-in System Interface (BSI) | 23 | Network |
| U1120 | Lost wheel distance message | 24 | Network |
| U1123 | Lost communication with LIN ECU 3 | 26 | Network |
| U1124 | SAS (CAN message) | 26 | Network |
| U1125 | Yaw rate sensor signal fault | 25 | Network |
| U1126 | EPS (CAN message) | 23 | Network |
| U1128 | Meter (CAN message) | 24 | Network |
| U1129 | ETACS (CAN message) | 21 | Network |
| U1130 | CAN network | 20 | Network |
| U1133 | LIN network | 23 | Network |
| U1150 | Communication failure with battery management system (BMS) | 17 | Network |
| U1151 | Loss of serial communications for class 2 devices | 17 | Network |
| U1152 | Lost communication with remote heater and air conditioning control module | 10 | Network |
| U1153 | CAN suspension network | 13 | Network |
| U115A | ESP2 CAN signal receiving timeout | 9 | Network |
| U1201 | Communication error | 21 | Network |
| U1202 | MCU CAN communication error 2 | 20 | Network |
| U1203 | Loss of serial communications for class 2 devices | 23 | Network |
| U1204 | Loss of serial communications for class 2 devices | 21 | Network |
| U1205 | No communication with the steering angle sensor | 23 | Network |
| U1206 | Loss of serial communications for class 2 devices | 18 | Network |
| U1208 | No communication with engine control unit | 11 | Network |
| U1209 | No communication with automatic transmission electronic control unit | 11 | Network |
| U1210 | Lost communication with automatic transmission electronic control unit | 16 | Network |
| U1211 | Engine parity/toggle bit error | 14 | Network |
| U1212 | CAN network | 15 | Network |
| U1217 | Invalid or missing data for external lamp outage | 16 | Network |
| U1218 | CAN BCM invalid value | 17 | Network |
| U121C | Lost communication with TBOXS | 2 | Network |
| U121E | Vehicle Control Unit (VCU) CAN 1 network segment lost communication with FCM | 9 | Network |
| U121F | Vehicle Control Unit (VCU) CAN 1 network segment lost communication with Automatic Parking Assist | 2 | Network |
| U1223 | Loss of serial communications for class 2 devices | 9 | Network |
| U1224 | FlexRay communication fault | 9 | Network |
| U1225 | Yaw rate sensor signal fault | 11 | Network |
| U1226 | Loss of serial communications for class 2 devices | 8 | Network |
| U1301 | Class 2 data link high | 22 | Network |
| U1302 | Data Length Error | 20 | Network |
| U1303 | Programming mode active message not received | 23 | Network |
| U1304 | CAN bus no communication with seat interface module | 19 | Network |
| U1305 | No communication with the steering angle sensor (SAS) | 22 | Network |
| U1308 | No communication with engine control unit | 20 | Network |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.