NetworkU1210
SeriousSeverity: Serious - have it checked soon
Lost communication with automatic transmission electronic control unit
Key terms: Control module: a small computer that runs one part of the car
1What it means in plain English
Control modules in the car cannot communicate with each other over the vehicle network.
2Common causes
- Wiring or connector fault on the communication bus
- Faulty control module
- Low battery voltage or poor ground
- Water ingress in a connector or module
- Aftermarket device interfering with the bus
3Can I drive?
The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.
This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.
4Brand data 16
| Brand | Code | Description | System |
|---|---|---|---|
| Chery | U1210 | Lost communication with Motor Control Unit Brand | Network |
| Daewoo | U1210 | Loss of serial communications for class 2 devices Brand | Network |
| DFFS | U1210 | Steering wheel angle signal is invalid or out of range Brand | Network |
| EOBD | U1210 | Brake lamp SW status error Brand | Network |
| GM | U1210 | Loss of serial communications for class 2 devices Brand | Network |
| Great Wall | U1210 | Engine controller not receiving CAN communication message from engine temperature controller Brand | Network |
| Holden | U1210 | Invalid Data Received from Transmission Shift Control Module Brand | Network |
| Isuzu | U1210 | No description available | Network |
| Mahindra | U1210 | No description available | Network |
| Maserati | U1210 | Lost Communication with LIN Intelligent Alternator Module Brand | Network |
| Mitsubishi | U1210 | Brake lamp SW Status Error Brand | Network |
| Opel | U1210 | Loss of serial communications for class 2 devices Brand | Network |
| Peugeot | U1210 | No description available | Network |
| Proton | U1210 | Brake lamp SW Status Error Brand | Network |
| Saab | U1210 | Loss of serial communications for class 2 devices Brand | Network |
| Toyota | U1210 | Lost communication with automatic transmission electronic control unit Brand | Network |
Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.
5Extended variant codes 2
These 7-character codes are manufacturer-specific variants of U1210 and may be reported by some scan tools.
| Brand | Code | Description | System |
|---|---|---|---|
| Mercedes-Benz | U121001 | SBC SPI Fehler - General Electric Failure Brand | Network |
| SsangYong | U121082 | CAN communication: Battery Management System (BMS) counter error (1D9) Brand | Network |
6Related codes
Browse Uxxx codes or U121xx codes.