Perodua fault codes
1,711 codes · 12 vehicle records · 0 ECU records · 0 live-data parameters
Codes 1,711
| Code | Description | Brands | System |
|---|---|---|---|
| U0182 | Lost Communication With Lighting Control Module - Front | 29 | Network |
| U0201 | Lost Communication With Door Control Module C | 31 | Network |
| U0202 | Lost Communication With Door Control Module D | 30 | Network |
| U0232 | Lost Communication With Side Obstacle Detection Control Module - Left | 28 | Network |
| U0233 | Lost Communication With Side Obstacle Detection Control Module - Right | 26 | Network |
| U0235 | Lost Communication With Cruise Control Front Distance Range Sensor | 29 | Network |
| U023A | Lost Communication With Image Processing Module A | 30 | Network |
| U0241 | Lost Communication With Headlamp Control Module A | 28 | Network |
| U0243 | Lost Communication With Parking Assist Control Module B | 25 | Network |
| U0293 | Lost Communication With Hybrid/EV Powertrain Control Module | 38 | Network |
| U0300 | Internal Control Module Software Incompatibility | 36 | Network |
| U0305 | Software Incompatibility With Cruise Control Module | 28 | Network |
| U0401 | Invalid Data Received From ECM/PCM A | 40 | Network |
| U0405 | Invalid Data Received From Cruise Control Module | 35 | Network |
| U0416 | Invalid Data Received From Vehicle Dynamics Control Module | 36 | Network |
| U0418 | Invalid Data Received From Brake System Control Module A | 37 | Network |
| U0423 | Invalid Data Received From Instrument Panel Cluster Control Module | 41 | Network |
| U045A | Invalid data received from parking assist control module A | 27 | Network |
| U1000 | CAN-No response | 35 | Network |
| U1001 | CAN passive error | 36 | Network |
| U1002 | CAN line error | 31 | Network |
| U1006 | Low voltage detected | 24 | Network |
| U10E0 | 0x4D Message reception timeout | 4 | Network |
| U1100 | Engine CAN timeout | 31 | Network |
| U1101 | Component protection active | 31 | Network |
| U1102 | F-CAN malfunction (bus off) | 30 | Network |
| U1103 | Production mode active | 31 | Network |
| U1104 | Transport mode | 30 | Network |
| U1110 | Communication failure with the transmission electronic control unit | 28 | Network |
| U1111 | Lost communication (IDM) | 30 | Network |
| U1112 | Function restriction due to implausible message(s) | 30 | Network |
| U1116 | KOS CAN timeout/Not equipped | 25 | Network |
| U1118 | Communication failure with Built-in System Interface (BSI) | 23 | Network |
| U1119 | Lost communication (multi display) | 15 | Network |
| U1120 | Lost wheel distance message | 24 | Network |
| U1121 | Communication failure with electric steering ECU | 29 | Network |
| U1124 | SAS (CAN message) | 26 | Network |
| U1125 | Yaw rate sensor signal fault | 25 | Network |
| U112A | Lost communication with RL seat active headrest ECU | 6 | Network |
| U112B | EMS not send not lower torque signal | 5 | Network |
| U112C | Lost communication with P seat pre-collision seatback ECU | 4 | Network |
| U112E | Lost communication with RL seat pre-collision seatback ECU | 4 | Network |
| U112F | Lost communication with RR seat pre-collision seatback ECU | 10 | Network |
| U1170 | PHEV LIN bit error | 15 | Network |
| U1198 | Coding not allowed | 13 | Network |
| U1199 | Loss of serial communications for class 2 devices | 12 | Network |
| U1207 | Lost communication with hybrid power management electronic control unit 1 | 15 | Network |
| U1235 | IP address conflict | 13 | Network |
| U1236 | No communication in driving profile rotary switch | 12 | Network |
| U1331 | Data length error (ID: 445) | 13 | Network |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.