NISSANGTR fault codes
Coverage shown is Nissan data: 2,320 codes · 20,978 vehicle records · 599 ECU records · 0 live-data parameters.
NISSANGTR shares fault-code data with Nissan. Data may not cover NISSANGTR-specific systems.
Codes 2,320
| Code | Description | Brands | System |
|---|---|---|---|
| U0298 | Lost Communication With DC/DC Converter Control Module A | 34 | Network |
| U0299 | Lost Communication With DC/DC Converter Control Module B | 25 | Network |
| U0300 | Internal Control Module Software Incompatibility | 36 | Network |
| U0400 | Invalid Data Received | 29 | Network |
| U0404 | Invalid Data Received From Gear Shift Control Module A | 36 | Network |
| U0418 | Invalid Data Received From Brake System Control Module A | 37 | Network |
| U042F | Communication error (invalid) | 5 | Network |
| U0644 | Lost communication with wastegate position sensor 'A' | 11 | Network |
| U0674 | Lost communication with wastegate position sensor 'B' | 11 | Network |
| U1000 | CAN-No response | 35 | Network |
| U1002 | CAN line error | 31 | Network |
| U1003 | No communication with towing system control module (J345); Open circuit | 33 | Network |
| U1010 | Lost communication with the powertrain interface ECU | 29 | Network |
| U1011 | Loss of serial communications for class 2 devices | 25 | Network |
| U1020 | Loss of serial communications for class 2 devices | 17 | Network |
| U1021 | Loss of serial communications for class 2 devices | 20 | Network |
| U1022 | Loss of serial communications for class 2 devices | 17 | Network |
| U1023 | De-Inhibit Completed Previously - Vehicle is not in Inhibited state. Clear codes and verify if DTC is no longer present in BCM | 18 | Network |
| U1086 | Loss of Serial Communications for Class 2 Devices | 10 | Network |
| U110E | Outside air temperature sensor communication malfunction | 7 | Network |
| U110F | LOST COMM(ECM) | 4 | Network |
| U1110 | Communication failure with the transmission electronic control unit | 28 | Network |
| U1111 | Lost communication (IDM) | 30 | Network |
| U1112 | Function restriction due to implausible message(s) | 30 | Network |
| U1114 | Inter-system CAN | 22 | Network |
| U1115 | CGW CAN timeout/Not equipped | 17 | Network |
| U1117 | Lost communication (ABS) | 25 | Network |
| U1118 | Communication failure with Built-in System Interface (BSI) | 23 | Network |
| U1119 | Lost communication (multi display) | 15 | Network |
| U1267 | No valid data available from ESM on CAN-C/CAN Dedicated Powertrain (D-PT) | 4 | Network |
| U1300 | Class 2 data link low | 21 | Network |
| U1321 | Communication failure with electric steering ECU | 21 | Network |
| U1322 | configuration error | 19 | Network |
| U1327 | Data Length Error | 13 | Network |
| U1507 | LIN transmission bit error | 14 | Network |
| U1508 | Software is not compatible with the engine management ECU | 14 | Network |
| U18BF | Secondary High Speed CAN Bus Subnet Configuration List | 7 | Network |
| U1A10 | Ignition status CAN signal | 3 | Network |
| U1B80 | No description available | 1 | Network |
| U1B81 | No description available | 1 | Network |
| U1B82 | No description available | 1 | Network |
| U1B83 | No description available | 1 | Network |
| U1CB0 | No description available | 1 | Network |
| U1E05 | Subnet 4 communication abnormality | 9 | Network |
| U2118 | Remote wake-up fault | 11 | Network |
| U2140 | Lost Communication with Underhood Electrical Center | 12 | Network |
| U2141 | Lost Communication with Rear Electrical Center | 9 | Network |
| U2144 | Knock Sensor Circuit Malfunction | 11 | Network |
| U2147 | Lost Communication with Auxiliary Heater System | 8 | Network |
| U2148 | Lost Communication with Sunroof Module | 8 | Network |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.