Fault code lookup

NetworkU1086

Serious

Severity: Serious - have it checked soon

Loss of Serial Communications for Class 2 Devices

10 brands affected · Description from GM data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 10

BrandCodeDescriptionSystem
Mercedes-BenzU1086No description available Network
DaewooU1086Loss of Serial Communications for Class 2 Devices BrandNetwork
DFFSU1086IPB caliper status unknown fault BrandNetwork
EOBDU1086Seeria side kadu klassi 2 seadmetega BrandNetwork
GMU1086Loss of Serial Communications for Class 2 Devices BrandNetwork
NissanU1086No description available Network
PeugeotU1086No description available Network
SaabU1086Loss of Serial Communications for Class 2 Devices BrandNetwork
SmartU1086No description available Network
SprinterU1086No description available Network

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Related codes

Browse Uxxx codes or U108xx codes.

OpenDTC - independent fault code reference