MARUTI fault codes
Coverage shown is Suzuki data: 5,947 codes · 72 vehicle records · 65 ECU records · 0 live-data parameters.
MARUTI shares fault-code data with Suzuki. Data may not cover MARUTI-specific systems.
Codes 5,947
| Code | Description | Brands | System |
|---|---|---|---|
| U1090 | Loss of Serial Communications for Class 2 Devices | 12 | Network |
| U1092 | Loss of Serial Communications for Class 2 Devices | 10 | Network |
| U1093 | Loss of Serial Communications for Class 2 Devices | 10 | Network |
| U1094 | Loss of Serial Communications for Class 2 Devices | 10 | Network |
| U1096 | Loss of Communications with IPC | 13 | Network |
| U1097 | Loss of serial communications for class 2 devices | 10 | Network |
| U1098 | Loss of serial communications for class 2 devices | 10 | Network |
| U109B | ELC. Parking lock LIN error | 4 | Network |
| U109C | RMCU CAN timeout | 3 | Network |
| U109D | GCU CAN timeout | 3 | Network |
| U10A0 | Communication with body controller_intelligent entry system (IBCM_PEPS1) is lost | 3 | Network |
| U10A1 | Communication with body controller (IBCM_2) is lost | 2 | Network |
| U10E0 | 0x4D Message reception timeout | 4 | Network |
| U10E1 | Multimedia audio and video system (MP5) CAN message is lost | 2 | Network |
| U10E2 | No description available | 1 | Network |
| U10E3 | No description available | 1 | Network |
| U1100 | Engine CAN timeout | 31 | Network |
| U1101 | Component protection active | 31 | Network |
| U1102 | F-CAN malfunction (bus off) | 30 | Network |
| U1103 | Production mode active | 31 | Network |
| U1104 | Transport mode | 30 | Network |
| U1105 | No communication with the steering angle sensor | 25 | Network |
| U1106 | Customer service mode active | 23 | Network |
| U1107 | Lost communication with hybrid power management electronic control unit 1 | 24 | Network |
| U110F | LOST COMM(ECM) | 4 | Network |
| U1110 | Communication failure with the transmission electronic control unit | 28 | Network |
| U1111 | Lost communication (IDM) | 30 | Network |
| U1112 | Function restriction due to implausible message(s) | 30 | Network |
| U1115 | CGW CAN timeout/Not equipped | 17 | Network |
| U1117 | Lost communication (ABS) | 25 | Network |
| U1118 | Communication failure with Built-in System Interface (BSI) | 23 | Network |
| U1119 | Lost communication (multi display) | 15 | Network |
| U111A | REAR CAMERA IMAGE SIGNAL | 11 | Network |
| U111B | MCU CAN timeout | 4 | Network |
| U111C | BMU CAN timeout | 5 | Network |
| U111D | TCU1 parity error signal | 12 | Network |
| U111E | TCU1 parity error signal | 8 | Network |
| U111F | EMS not send engine spd signal | 4 | Network |
| U1120 | Lost wheel distance message | 24 | Network |
| U1121 | Communication failure with electric steering ECU | 29 | Network |
| U1126 | EPS (CAN message) | 23 | Network |
| U112F | Lost communication with RR seat pre-collision seatback ECU | 10 | Network |
| U1133 | LIN network | 23 | Network |
| U1135 | Valid except code 200 | 20 | Network |
| U1137 | Invalid or missing data for telltales | 15 | Network |
| U1139 | Communication error (invalid) | 13 | Network |
| U113A | No description available | 4 | Network |
| U113B | Lost Communication with Switch Bank Module | 2 | Network |
| U1140 | Valid except model 257 and model 290 | 15 | Network |
| U1144 | Loss of Communications with PHN | 12 | Network |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.