Fault code lookup

NetworkU1090

Serious

Severity: Serious - have it checked soon

Loss of Serial Communications for Class 2 Devices

12 brands affected · Description from GM data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 12

BrandCodeDescriptionSystem
Mercedes-BenzU1090No description available Network
DaewooU1090Loss of Serial Communications for Class 2 Devices BrandNetwork
DFFSU1090Right motor circuit open BrandNetwork
EOBDU1090Accu CAN-fout BrandNetwork
GMU1090Loss of Serial Communications for Class 2 Devices BrandNetwork
MitsubishiU1090Bat-CAN error BrandNetwork
PeugeotU1090No description available Network
ProtonU1090Bat-CAN error BrandNetwork
SaabU1090Loss of Serial Communications for Class 2 Devices BrandNetwork
SmartU1090No description available Network
SprinterU1090No description available Network
SuzukiU1090Lost Communication With Telematics Control Unit BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 2

These 7-character codes are manufacturer-specific variants of U1090 and may be reported by some scan tools.

BrandCodeDescriptionSystem
Mercedes-BenzU109000Lost Communication With COM451ev BrandNetwork
Mercedes-BenzU109083value of signal protection calculation incorrect Error entry for message information (MsgCntr, CRC) for all COM modul messages BrandNetwork

6Related codes

Browse Uxxx codes or U109xx codes.

OpenDTC - independent fault code reference