Fault code lookup

NetworkU1140

Serious

Severity: Serious - have it checked soon

Valid except model 257 and model 290

15 brands affected · Description from Mercedes-Benz data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 15

BrandCodeDescriptionSystem
Mercedes-BenzU1140Valid except model 257 and model 290 BrandNetwork
DaewooU1140Loss of serial communications for class 2 devices BrandNetwork
EOBDU1140Left cabin heater BrandNetwork
GMU1140Loss of serial communications for class 2 devices BrandNetwork
HoldenU1140No description available Network
HyundaiU1140No description available Network
OpelU1140Loss of serial communications for class 2 devices BrandNetwork
PeugeotU1140No description available Network
SaabU1140Loss of serial communications for class 2 devices BrandNetwork
MG (SAIC)U1140Body computer not present BrandNetwork
SmartU1140Valid except model 257 and model 290 BrandNetwork
SprinterU1140Valid except model 257 and model 290 BrandNetwork
SubaruU1140No description available Network
SuzukiU1140Lost Communication With Body Control Module BrandNetwork
ToyotaU1140Lost communication with active exhaust valve 2 BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Related codes

Browse Uxxx codes or U114xx codes.

OpenDTC - independent fault code reference