Holden fault codes
15,866 codes · 57 vehicle records · 254 ECU records · 0 live-data parameters
Codes 15,866
| Code | Description | Brands | System |
|---|---|---|---|
| U103B | A/C compressor: no communication; Short to plus | 10 | Network |
| U1040 | Loss of Class 2 Communications with ABS | 15 | Network |
| U1041 | Loss of EBCM Communication | 18 | Network |
| U1043 | Loss of Serial Communications for Class 2 Devices | 14 | Network |
| U1048 | Loss of Serial Communications for Class 2 Devices | 11 | Network |
| U1056 | Loss of Communications with RSS | 11 | Network |
| U1064 | Loss Of Communications With DIM | 13 | Network |
| U1065 | Loss of Communications with IPM | 12 | Network |
| U1067 | Loss of Serial Communications for Class 2 Devices | 13 | Network |
| U1068 | Vehicle conversion to 10x4/4 DNA | 10 | Network |
| U1069 | China VI B | 11 | Network |
| U106A | Lost Communication with Multifunction Energy Storage Capacitor Control Module | 7 | Network |
| U106B | Left electronic caliper release fault | 7 | Network |
| U1082 | Loss of Serial Communications for Class 2 Devices | 13 | Network |
| U1088 | Loss of Communications with SDM | 12 | Network |
| U1096 | Loss of Communications with IPC | 13 | Network |
| U1100 | Engine CAN timeout | 31 | Network |
| U1101 | Component protection active | 31 | Network |
| U1102 | F-CAN malfunction (bus off) | 30 | Network |
| U1103 | Production mode active | 31 | Network |
| U1104 | Transport mode | 30 | Network |
| U1105 | No communication with the steering angle sensor | 25 | Network |
| U1108 | No communication with engine control unit | 23 | Network |
| U1109 | No communication with automatic transmission electronic control unit | 23 | Network |
| U110B | No description available | 9 | Network |
| U1110 | Communication failure with the transmission electronic control unit | 28 | Network |
| U1111 | Lost communication (IDM) | 30 | Network |
| U1112 | Function restriction due to implausible message(s) | 30 | Network |
| U1113 | Valid except model 177 | 26 | Network |
| U1114 | Inter-system CAN | 22 | Network |
| U1115 | CGW CAN timeout/Not equipped | 17 | Network |
| U1116 | KOS CAN timeout/Not equipped | 25 | Network |
| U1117 | Lost communication (ABS) | 25 | Network |
| U1118 | Communication failure with Built-in System Interface (BSI) | 23 | Network |
| U111A | REAR CAMERA IMAGE SIGNAL | 11 | Network |
| U111D | TCU1 parity error signal | 12 | Network |
| U111E | TCU1 parity error signal | 8 | Network |
| U1121 | Communication failure with electric steering ECU | 29 | Network |
| U1122 | Data bus implausible message | 26 | Network |
| U1124 | SAS (CAN message) | 26 | Network |
| U1125 | Yaw rate sensor signal fault | 25 | Network |
| U1127 | 4WD (CAN message) | 22 | Network |
| U1128 | Meter (CAN message) | 24 | Network |
| U112F | Lost communication with RR seat pre-collision seatback ECU | 10 | Network |
| U1133 | LIN network | 23 | Network |
| U1134 | Lost stop/start switch 2 message | 12 | Network |
| U1135 | Valid except code 200 | 20 | Network |
| U1136 | KOS (CAN message) | 22 | Network |
| U1137 | Invalid or missing data for telltales | 15 | Network |
| U1138 | 4WD CAN timeout | 16 | Network |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.