JAGUAR fault codes
Coverage shown is Land Rover data: 14,401 codes · 75 vehicle records · 2,749 ECU records · 47,114 live-data parameters.
JAGUAR shares fault-code data with Land Rover. Data may not cover JAGUAR-specific systems.
Codes 14,401
| Code | Description | Brands | System |
|---|---|---|---|
| U05F1 | Engine speed signal is invalid | 1 | Network |
| U05F2 | Coolant temperature signal is invalid | 1 | Network |
| U05F3 | Fuel consumption signal is invalid | 1 | Network |
| U05F4 | Gearshift position signal is invalid | 1 | Network |
| U05F5 | Compressor torque signal update is missing | 1 | Network |
| U0601 | Lost communication with particulate filter pressure sensor 'A' | 16 | Network |
| U0602 | Lost communication with particulate filter pressure sensor 'B' | 14 | Network |
| U0606 | Lost communication with throttle/pedal position sensor/switch 'A' | 11 | Network |
| U0619 | Lost communication with reductant level sensor 'A' | 5 | Network |
| U0623 | Lost communication with coolant pump 'A' | 12 | Network |
| U0624 | Lost communication with coolant pump 'B' | 4 | Network |
| U0666 | Lost communication with reductant pressure sensor | 4 | Network |
| U069F | Pakopaineanturin 'C' kanssa menetty yhteys | 3 | Network |
| U0800 | No description available | 1 | Network |
| U0967 | No description available | 1 | Network |
| U0A1A | LIN bus A - information missing | 2 | Network |
| U1000 | CAN-No response | 35 | Network |
| U1001 | CAN passive error | 36 | Network |
| U1002 | CAN line error | 31 | Network |
| U1003 | No communication with towing system control module (J345); Open circuit | 33 | Network |
| U1004 | Invalid data from towing system control module (J345) | 30 | Network |
| U1005 | CAN network | 24 | Network |
| U1006 | Low voltage detected | 24 | Network |
| U1007 | General fault on suspension and wheel CAN network | 23 | Network |
| U1008 | General fault on suspension and wheel CAN network | 29 | Network |
| U1009 | ECU silent on suspension and wheel CAN network | 27 | Network |
| U100A | No communications with control module for access/start authorization | 9 | Network |
| U100B | Semi-automatic parallel parking system | 8 | Network |
| U100C | No. 10 BMU and BMS communication abnormality | 9 | Network |
| U100D | Ambient Temperature High | 4 | Network |
| U100E | Ambient Temperature Low | 11 | Network |
| U100F | Lost Communication With Battery Monitoring Sensor 'B' | 9 | Network |
| U1010 | Lost communication with the powertrain interface ECU | 29 | Network |
| U1011 | Loss of serial communications for class 2 devices | 25 | Network |
| U1014 | Loss of serial communications for class 2 devices | 25 | Network |
| U101A | Selector lever no communication with control unit in dash panel insert | 8 | Network |
| U101B | Selector lever no communication with gearbox control unit | 8 | Network |
| U101C | Selector lever no communication with data bus diagnostic interface | 8 | Network |
| U101D | Power steering control module: no communication | 8 | Network |
| U101E | Lost communication with PCM node J | 7 | Network |
| U101F | Lost communication with PCM node l | 7 | Network |
| U1020 | Loss of serial communications for class 2 devices | 17 | Network |
| U1021 | Loss of serial communications for class 2 devices | 20 | Network |
| U1027 | Vehicles with code JFZA | 17 | Network |
| U1039 | Vehicle speed signal missing or incorrect | 12 | Network |
| U1040 | Loss of Class 2 Communications with ABS | 15 | Network |
| U1041 | Loss of EBCM Communication | 18 | Network |
| U1051 | Loss of Serial Communications for Class 2 Devices | 14 | Network |
| U1058 | J1850 SCP Trans Fluid Temp Invalid - Instr Clstr | 9 | Network |
| U1059 | Loss of Serial Communications for Class 2 Devices | 9 | Network |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.