Fault code lookup

NetworkU1004

Serious

Severity: Serious - have it checked soon

Invalid data from towing system control module (J345)

30 brands affected · Description from Volkswagen data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 30

BrandCodeDescriptionSystem
Ashok Leyland CVU1004No description available Network
Mercedes-BenzU1004No description available Network
BYDU1004CAN short to ground BrandNetwork
CheryU1004Gateway CAN 5 network segment off BrandNetwork
ChryslerU1004No description available Network
DaewooU1004Loss of serial communications for class 2 devices BrandNetwork
DFFSU1004No description available Network
DFXKU1004Invalid Data from Towing System Control Module BrandNetwork
EOBDU1004AS&G Amrith CAN BrandNetwork
GeelyU1004Light Rain Sensor LIN Communication Error BrandNetwork
GMU1004Loss of serial communications for class 2 devices BrandNetwork
HoldenU1004No description available Network
HondaU1004No description available Network
HyundaiU1004No description available Network
IsuzuU1004No description available Network
Land RoverU1004Software Incompatibility With Closing Velocity Module BrandNetwork
MahindraU1004No description available Network
MaseratiU1004No description available Network
MitsubishiU1004AS&G CAN timeout BrandNetwork
OpelU1004Loss of serial communications for class 2 devices BrandNetwork
PeugeotU1004No description available Network
ProtonU1004AS&G CAN timeout BrandNetwork
SaabU1004Loss of serial communications for class 2 devices BrandNetwork
SmartU1004No description available Network
SprinterU1004No description available Network
SuzukiU1004No description available Network
SWM MotorU1004communication timeout fault with vehicle controller BrandNetwork
TataU1004No description available Network
ToyotaU1004AS&G CAN timeout BrandNetwork
VolkswagenU1004Invalid data from towing system control module (J345) BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 3

These 7-character codes are manufacturer-specific variants of U1004 and may be reported by some scan tools.

BrandCodeDescriptionSystem
PorscheU100400No description available Network
SsangYongU100400CAN communication: Transmission Control Unit (TCU) message not received (gear position feedback) BrandNetwork
SsangYongU100487CAN bus: ICM no signal BrandNetwork

6Related codes

Browse Uxxx codes or U100xx codes.

OpenDTC - independent fault code reference