Daihatsu fault codes
1,677 codes · 35 vehicle records · 41 ECU records · 0 live-data parameters
Codes 1,677
| Code | Description | Brands | System |
|---|---|---|---|
| U1100 | Engine CAN timeout | 31 | Network |
| U1101 | Component protection active | 31 | Network |
| U1102 | F-CAN malfunction (bus off) | 30 | Network |
| U1103 | Production mode active | 31 | Network |
| U1104 | Transport mode | 30 | Network |
| U1110 | Communication failure with the transmission electronic control unit | 28 | Network |
| U1111 | Lost communication (IDM) | 30 | Network |
| U1112 | Function restriction due to implausible message(s) | 30 | Network |
| U1116 | KOS CAN timeout/Not equipped | 25 | Network |
| U1118 | Communication failure with Built-in System Interface (BSI) | 23 | Network |
| U1119 | Lost communication (multi display) | 15 | Network |
| U1120 | Lost wheel distance message | 24 | Network |
| U1121 | Communication failure with electric steering ECU | 29 | Network |
| U1124 | SAS (CAN message) | 26 | Network |
| U1125 | Yaw rate sensor signal fault | 25 | Network |
| U112A | Lost communication with RL seat active headrest ECU | 6 | Network |
| U112B | EMS not send not lower torque signal | 5 | Network |
| U112C | Lost communication with P seat pre-collision seatback ECU | 4 | Network |
| U112E | Lost communication with RL seat pre-collision seatback ECU | 4 | Network |
| U112F | Lost communication with RR seat pre-collision seatback ECU | 10 | Network |
| U1170 | PHEV LIN bit error | 15 | Network |
| U1198 | Coding not allowed | 13 | Network |
| U1199 | Loss of serial communications for class 2 devices | 12 | Network |
| U1207 | Lost communication with hybrid power management electronic control unit 1 | 15 | Network |
| U1235 | IP address conflict | 13 | Network |
| U1236 | No communication in driving profile rotary switch | 12 | Network |
| U1331 | Data length error (ID: 445) | 13 | Network |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.