Results for “U112”
Fault codes 42
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| U1120 | Lost wheel distance message | 24 | Network |
| U1121 | Communication failure with electric steering ECU | 29 | Network |
| U1122 | Data bus implausible message | 26 | Network |
| U1123 | Lost communication with LIN ECU 3 | 26 | Network |
| U1124 | SAS (CAN message) | 26 | Network |
| U1125 | Yaw rate sensor signal fault | 25 | Network |
| U1126 | EPS (CAN message) | 23 | Network |
| U1127 | 4WD (CAN message) | 22 | Network |
| U1128 | Meter (CAN message) | 24 | Network |
| U1129 | ETACS (CAN message) | 21 | Network |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| U112A | Lost communication with RL seat active headrest ECU | 6 | Network |
| U112B | EMS not send not lower torque signal | 5 | Network |
| U112C | Lost communication with P seat pre-collision seatback ECU | 4 | Network |
| U112D | Lost Communication with evic Steering Wheel Switches | 1 | Network |
| U112E | Lost communication with RL seat pre-collision seatback ECU | 4 | Network |
| U112F | Lost communication with RR seat pre-collision seatback ECU | 10 | Network |
| U112002 | CAN communication: MCU_3A3 communication error - timeout | 1 | Network |
| U112004 | The security module of the control unit has detected a communication error. There is an internal fault. | 1 | Network |
| U112041 | The security module of the control unit has detected a communication error. General checksum failure. | 1 | Network |
| U112081 | Time sync message invalid (IT-Security) | 1 | Network |
| U112083 | SecOC calculation incorrect (IT-Security) | 1 | Network |
| U112087 | The security module of the control unit has detected a communication error. | 1 | Network |
| U112088 | Time sync message missing. | 1 | Network |
| U1120E0 | Ethernet Inter Processor Communication Containers are dropped on uC | 1 | Network |
| U1120E1 | Ethernet Inter Processor Communication Containers are dropped on uP | 1 | Network |
| Code | Description | Brands | System |
|---|---|---|---|
| U112A | Lost communication with RL seat active headrest ECU | 6 | Network |
| U112B | EMS not send not lower torque signal | 5 | Network |
| U112C | Lost communication with P seat pre-collision seatback ECU | 4 | Network |
| U112D | Lost Communication with evic Steering Wheel Switches | 1 | Network |
| U112E | Lost communication with RL seat pre-collision seatback ECU | 4 | Network |
| U112F | Lost communication with RR seat pre-collision seatback ECU | 10 | Network |
| U112002 | CAN communication: MCU_3A3 communication error - timeout | 1 | Network |
| U112004 | The security module of the control unit has detected a communication error. There is an internal fault. | 1 | Network |
| U112041 | The security module of the control unit has detected a communication error. General checksum failure. | 1 | Network |
| U112081 | Time sync message invalid (IT-Security) | 1 | Network |
| U112083 | SecOC calculation incorrect (IT-Security) | 1 | Network |
| U112087 | The security module of the control unit has detected a communication error. | 1 | Network |
| U112088 | Time sync message missing. | 1 | Network |
| U1120E0 | Ethernet Inter Processor Communication Containers are dropped on uC | 1 | Network |
| U1120E1 | Ethernet Inter Processor Communication Containers are dropped on uP | 1 | Network |
Advanced: scanner vehicle and live-data matches
Vehicles 1
Vehicle data covers only some brands. These matches come from scanner data, not from a full vehicle index, so treat them as approximate.
| Brand | Model / variant | Details |
|---|---|---|
| Porsche | No active fault codes stored except: “ Calibration“ and “U112200 Data bus – message implausible“ | code C110B54 |
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.