Volvo fault codes
248 codes · 280 vehicle records · 139 ECU records · 0 live-data parameters
Codes 248
| Code | Description | Brands | System |
|---|---|---|---|
| C1A6754 | If DTC FSM- is also stored, fault trace this DTC | 1 | Chassis |
| C2428 | Voltage input 1 # (#A42) is powered via a dedicated fuse for SRS from the relay for 15-feed | 2 | Chassis |
| C346E | EU Focus | 3 | Chassis |
| CB013 | Cerberus System Reset | 2 | Chassis |
| CC212 | Adjustment | 1 | Chassis |
| CD340 | Ford Galaxy | 4 | Chassis |
| CD345 | Ford Mondeo | 4 | Chassis |
| P0010 | A Camshaft Position Actuator Circuit (Bank 1) | 41 | Powertrain |
| P0011 | A Camshaft Position - Timing Over-Advanced or System Performance (Bank 1) | 44 | Powertrain |
| P0012 | A Camshaft Position - Timing Over-Retarded (Bank 1) | 39 | Powertrain |
| P001621 | To check the camshaft setting, go to fault tracing for DTC ECM- and follow it | 1 | Powertrain |
| P0020 | A Camshaft Position Actuator Circuit (Bank 2) | 37 | Powertrain |
| P0021 | A Camshaft Position - Timing Over-Advanced or System Performance (Bank 2) | 39 | Powertrain |
| P0022 | A Camshaft Position - Timing Over-Retarded (Bank 2) | 33 | Powertrain |
| P003A85 | That is to say DTC ECM | 1 | Powertrain |
| P0040 | O2 Sensor Signals Swapped Bank 1 Sensor 1 / Bank 2 Sensor 1 | 31 | Powertrain |
| P0041 | O2 Sensor Signals Swapped Bank 1 Sensor 2 / Bank 2 Sensor 2 | 29 | Powertrain |
| P0068 | MAP/MAF - Throttle Position Correlation | 36 | Powertrain |
| P012000 | The diagnostic trouble code (DTC) is only generated if any of the diagnostic trouble codes ECM-, ECM-P012200 or ECM-P012300 have been detected | 2 | Powertrain |
| P012200 | The diagnostic trouble code (DTC) is only generated if any of the diagnostic trouble codes ECM-P012000, ECM- or ECM-P012300 have been detected | 4 | Powertrain |
| P012300 | The diagnostic trouble code (DTC) is only generated if any of the diagnostic trouble codes ECM-P012000, ECM-P012200 or ECM- have been detected | 6 | Powertrain |
| P012800 | If the DTC ECM- is set it shall be faulttraced before this DTC | 3 | Powertrain |
| P017100 | Das Gemisch (Zylinderreihe 1) ist zu mager. | 3 | Powertrain |
| P017200 | If the values are greater than 1.15 on bank 1, fault trace according to ECM | 3 | Powertrain |
| P017400 | If the values are less than 0.85 on bank 2, fault trace according to ECM | 2 | Powertrain |
| P017500 | If the values are greater than 1.15 on bank 2, fault trace according to ECM | 2 | Powertrain |
| P022000 | The diagnostic trouble code (DTC) is only generated if any of the diagnostic trouble codes ECM-, ECM-P022200 or ECM-P022300 have been detected | 2 | Powertrain |
| P022200 | Der Positionssensor 2 der Drosselklappe hat Kurzschluss nach Masse. | 4 | Powertrain |
| P022300 | The diagnostic trouble code (DTC) is only generated if any of the diagnostic trouble codes ECM-P022000, ECM-P022200 or ECM- have been detected | 3 | Powertrain |
| P029900 | Der Ladedruck des Abgasturboladers 1 weicht bei niedriger Motordrehzahl vom Sollwert ab. | 5 | Powertrain |
| P0301 | Cylinder 1 Misfire Detected | 45 | Powertrain |
| P0302 | Cylinder 2 Misfire Detected | 45 | Powertrain |
| P0303 | Cylinder 3 Misfire Detected | 45 | Powertrain |
| P0304 | Cylinder 4 Misfire Detected | 45 | Powertrain |
| P0305 | Cylinder 5 Misfire Detected | 44 | Powertrain |
| P0315 | Crankshaft Position System Variation Not Learned | 34 | Powertrain |
| P034000 | Diagnostic trouble code (DTC) ECM- is for the camshaft position (CMP) sensor, intake | 3 | Powertrain |
| P034200 | Diagnostic trouble code (DTC) ECM- is for the camshaft position (CMP) sensor, intake | 1 | Powertrain |
| P034211 | Diagnostic trouble code (DTC) ECM- is for the camshaft position (CMP) sensor, intake | 1 | Powertrain |
| P034315 | Diagnostic trouble code (DTC) ECM- is for the camshaft position (CMP) sensor, intake | 1 | Powertrain |
| P034400 | Diagnostic trouble code (DTC) ECM- is for the camshaft position (CMP) sensor, intake | 2 | Powertrain |
| P036500 | Diagnostic trouble code (DTC) ECM- is for the camshaft position (CMP) sensor, exhaust | 2 | Powertrain |
| P036600 | Diagnostic trouble code (DTC) ECM- is for the camshaft position (CMP) sensor, exhaust | 2 | Powertrain |
| P036700 | Diagnostic trouble code (DTC) ECM- is for the camshaft position (CMP) sensor, exhaust | 1 | Powertrain |
| P036711 | Diagnostic trouble code (DTC) ECM- is for the camshaft position (CMP) sensor, exhaust | 1 | Powertrain |
| P036815 | Diagnostic trouble code (DTC) ECM- is for the camshaft position (CMP) sensor, exhaust | 1 | Powertrain |
| P0403 | Exhaust Gas Recirculation Circuit | 44 | Powertrain |
| P0405 | Exhaust Gas Recirculation Sensor A Circuit Low | 41 | Powertrain |
| P0406 | Exhaust Gas Recirculation Sensor A Circuit High | 41 | Powertrain |
| P0418 | AIR System Control A Circuit | 31 | Powertrain |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.