SsangYong fault codes
4,752 codes · 93 vehicle records · 0 ECU records · 0 live-data parameters
Codes 4,752
| Code | Description | Brands | System |
|---|---|---|---|
| C150100 | Abnormal sensor initialization | 1 | Chassis |
| C150101 | If abnormal EPB switch signal is detected, EPB ECU sets DTC | 2 | Chassis |
| C150300 | ESP off switch error | 1 | Chassis |
| C150A15 | Blind Spot Detection (BSD) switch module circuit open or short to battery (+) | 1 | Chassis |
| C151300 | Brake switch error | 1 | Chassis |
| C152000 | Clutch switch open/short | 1 | Chassis |
| C152001 | Clutch switch open/short | 1 | Chassis |
| C152200 | Head lamp signal line open | 1 | Chassis |
| C152600 | HDC switch short to BAT | 1 | Chassis |
| C152601 | HDC switch short to BAT | 2 | Chassis |
| C152609 | Der Niveausensor hinten links hat Funktionsstörung. Es liegt ein Bauteilfehler vor. | 2 | Chassis |
| C152701 | Reverse switch circuit open/short | 1 | Chassis |
| C153901 | Neutral switch circuit open or short | 1 | Chassis |
| C160000 | Supply voltage failure detection (undervoltage) | 1 | Chassis |
| C160100 | CAN: ABS/ESP message(200h) not received (time out) | 1 | Chassis |
| C160101 | PCAN bus off | 1 | Chassis |
| C160200 | Communication error between engine ECU and HECU | 1 | Chassis |
| C160300 | Longitudinal acceleration sensor calibration conditions not met (EOL) | 2 | Chassis |
| C16034B | Over heat protection | 1 | Chassis |
| C160400 | Communication error between TCCU(4WD) and HECU | 1 | Chassis |
| C160404 | If hardware error on HECU is detected, HECU sets DTC | 2 | Chassis |
| C160500 | Communication error between cluster(meter) and HECU | 1 | Chassis |
| C160600 | Parameter not downloaded | 1 | Chassis |
| C160700 | CAN: SAS message not received (time out) | 1 | Chassis |
| C160800 | CAN: ACC message not received (time out) | 1 | Chassis |
| C160887 | CAN communication: local CAN FD2 - bus off | 1 | Chassis |
| C160900 | CAN communication: local CAN communication error - bus off | 1 | Chassis |
| C160987 | CAN communication: local CAN communication error - bus off | 1 | Chassis |
| C160991 | CAN communication: local CAN communication error - timeout | 1 | Chassis |
| C161000 | Der Hydraulikkreislauf hinten links hat Funktionsstörung. | 2 | Chassis |
| C161008 | PCAN bus off | 1 | Chassis |
| C161087 | CAN: P-CAN communication interruption(bus off) | 1 | Chassis |
| C161088 | CAN communication: C-CAN communication impossible - bus off | 1 | Chassis |
| C161100 | If EMS CAN message is not received, IGPM sets DTC | 2 | Chassis |
| C161108 | If EMS CAN message is not received, HECU sets DTC | 2 | Chassis |
| C161187 | If ECM CAN message is not received, LDWS ECU sets DTC | 2 | Chassis |
| C161200 | If TCU CAN message is not received, IGPM sets DTC | 2 | Chassis |
| C161208 | If TCU CAN message is not received, HECU sets DTC | 2 | Chassis |
| C161300 | Der Systemdruck ist zu hoch | 2 | Chassis |
| C161308 | If abnormal ECM CAN message is received, HECU sets DTC | 2 | Chassis |
| C161386 | If invalid PCM CAN message is received, LDWS ECU sets DTC | 2 | Chassis |
| C161387 | CAN communication: Vehicle Control Unit (VCU) message not received - timeout | 1 | Chassis |
| C161400 | Die Druckversorgung des Systems hat Funktionsstörung | 2 | Chassis |
| C161408 | CAN time-out EPS | 1 | Chassis |
| C161487 | CAN communication: Steering Angle Sensor (SAS)/Electric Power Steering (EPS) timeout | 1 | Chassis |
| C161490 | CAN communication: Central Gateway (CGW) message not received - timeout | 1 | Chassis |
| C161500 | Der Druckabfall im System ist zu hoch. | 2 | Chassis |
| C161508 | CAN time-out cluster | 1 | Chassis |
| C161587 | CAN communication: no communication on instrument panel - timeout | 1 | Chassis |
| C161600 | If C-CAN Bus off is detected, IGPM sets DTC | 2 | Chassis |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.