SsangYong fault codes
4,752 codes · 93 vehicle records · 0 ECU records · 0 live-data parameters
Codes 4,752
| Code | Description | Brands | System |
|---|---|---|---|
| C162900 | Der Raddrehzahlsensor vorn rechts hat Kurzschluss nach Masse. | 2 | Chassis |
| C162908 | The SCC Module sets DTC when there is any failure while counting the message from cluster | 2 | Chassis |
| C162981 | CAN communication: Front Radar Module (FRM) - Forward Collision Mitigation (FCM) communication failure | 1 | Chassis |
| C162A08 | CAN communication: Motor Control Unit (MCU) message error | 1 | Chassis |
| C162B08 | CAN communication: Vehicle Control Unit (VCU) message error | 1 | Chassis |
| C163000 | Der Raddrehzahlsensor hinten rechts hat Kurzschluss nach Masse. | 2 | Chassis |
| C163008 | CAN communication: C-CAN communication error - bus off | 1 | Chassis |
| C163081 | CAN communication: instrument panel signal error | 1 | Chassis |
| C163181 | CAN communication: Adaptive Cruise Control (ACC) related Central Gateway (CGW) signal error | 1 | Chassis |
| C163281 | CAN communication: AVNT (SSC) signal error - invalid | 1 | Chassis |
| C163282 | CAN communication: AVNT (SSC) signal error - alive counter | 1 | Chassis |
| C163283 | CAN communication: AVNT (SSC) signal error - checksum | 1 | Chassis |
| C163300 | CAN communication: instrument panel signal error | 1 | Chassis |
| C163386 | If an undefined vehicle signal is sent by Cluster via CAN lines, LKAS generates the fault code and turns on the Malfunction Indicator Lamp | 2 | Chassis |
| C163500 | CAN communication: Central Gateway (CGW) message not received | 1 | Chassis |
| C163508 | The SCC Module sets DTC when it received abnormal CAN message from ESP(ESC) via C-CAN | 2 | Chassis |
| C163908 | CAN communication: Front Radar Module (FRM) message error | 1 | Chassis |
| C164200 | End of Line alignment erroneous - signal quality insufficient | 2 | Chassis |
| C164700 | CAN: hardware error(sensor cluster) | 1 | Chassis |
| C165987 | CAN communication: Steering Angle Sensor (SAS) message not received | 1 | Chassis |
| C169200 | CAN Error: ABS/ESP Time out | 1 | Chassis |
| C169287 | CAN communication: Electronic Stability Control (ESC) message not received | 1 | Chassis |
| C169300 | CAN Error: ABS/ESP signal error | 1 | Chassis |
| C169386 | CAN communication: Electronic Stability Control (ESC) message reception error | 1 | Chassis |
| C170000 | Switch failure detection (switch unknown failure) | 1 | Chassis |
| C170004 | Electric Power Steering (EPS) ECUs storage area error (non-volatile memory) | 1 | Chassis |
| C170100 | Coding error | 2 | Chassis |
| C170200 | Variant coding error | 1 | Chassis |
| C170205 | Variant coding error | 1 | Chassis |
| C170255 | If variant code error is detected, BSD ECU sets DTC | 2 | Chassis |
| C170300 | AVH max. hold time expired | 1 | Chassis |
| C170400 | ECU fail-safe relay fault | 3 | Chassis |
| C170401 | ECU fail-safe relay fault | 1 | Chassis |
| C170549 | Boost Integrated Circuit (IC) error | 1 | Chassis |
| C170563 | Boost Integrated Circuit (IC) not working | 1 | Chassis |
| C170A04 | Right front Blind Spot Detection (BSD) hardware error | 1 | Chassis |
| C170A11 | Blind Spot Detection (BSD) switch circuit short to ground | 1 | Chassis |
| C170B04 | Left front side Blind Spot Detection (BSD) hardware error | 1 | Chassis |
| C170B12 | If the BSD ECU detects a short circuit in the switch LED power cable, BSD ECU sets DTC | 2 | Chassis |
| C170C04 | Right rear Blind Spot Detection (BSD) hardware error | 1 | Chassis |
| C170D04 | Left rear Blind Spot Detection (BSD) hardware error | 1 | Chassis |
| C171101 | Electric Power Steering (EPS) ECU abnormal shutdown detection | 1 | Chassis |
| C171301 | CAN communication: Front Radar Module (FRM) message error | 1 | Chassis |
| C171648 | Electronic Parking Brake (EPB) cannot be used (electronic parking brake actuator position unknown) | 1 | Chassis |
| C171748 | Electronic Parking Brake (EPB) signal error (software) | 1 | Chassis |
| C171791 | Electronic Parking Brake (EPB) undefined signal input (software) | 1 | Chassis |
| C17354B | Right rear Blind Spot Detection (BSD) module overheating | 1 | Chassis |
| C17364B | Left rear Blind Spot Detection (BSD) module overheating | 1 | Chassis |
| C174000 | Switch failure detection (switch blocked timeout) | 1 | Chassis |
| C174305 | Blind Spot Detection (BSD) software version mismatch (master and slave) | 1 | Chassis |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.