Opel fault codes
15,060 codes · 16 vehicle records · 175 ECU records · 0 live-data parameters
Codes 15,060
| Code | Description | Brands | System |
|---|---|---|---|
| U1210 | Lost communication with automatic transmission electronic control unit | 16 | Network |
| U1211 | Engine parity/toggle bit error | 14 | Network |
| U1213 | The information sent by the electronic stability program ECU is faulty. | 17 | Network |
| U1216 | CAN line (connection with suspension) | 11 | Network |
| U1217 | Invalid or missing data for external lamp outage | 16 | Network |
| U1218 | CAN BCM invalid value | 17 | Network |
| U121D | Lost communication with Passive Entry Passive Start | 8 | Network |
| U121E | Vehicle Control Unit (VCU) CAN 1 network segment lost communication with FCM | 9 | Network |
| U1221 | Loss of serial communications for class 2 devices | 14 | Network |
| U1222 | Loss of serial communications for class 2 devices | 15 | Network |
| U1225 | Yaw rate sensor signal fault | 11 | Network |
| U1229 | Loss of serial communications for class 2 devices | 7 | Network |
| U122F | Digital Audio Broadcast Tuner | 8 | Network |
| U1233 | Reversible alternator | 13 | Network |
| U1234 | Loss of serial communications for class 2 devices | 11 | Network |
| U1240 | Loss of serial communications for class 2 devices | 11 | Network |
| U1244 | Loss of serial communications for class 2 devices | 10 | Network |
| U1258 | Satellite Antenna Circuit | 10 | Network |
| U1262 | J1850 SCP Comm Bus Fault - Instr Clstr | 13 | Network |
| U1263 | Universal Serial Bus (USB) Circuit | 10 | Network |
| U1265 | Motor posisi flap suhu Kiri | 9 | Network |
| U1286 | Battery Management System (BMS) sub-board communication failure | 6 | Network |
| U1289 | Vehicle Control Unit (VCU) communication failure with steering system | 5 | Network |
| U12A0 | No description available | 4 | Network |
| U12AA | System Configuration Error | 8 | Network |
| U12AB | Antenna Signal Circuit | 8 | Network |
| U12AC | Control Module Overtemperature | 8 | Network |
| U12AD | Control Module Overtemperature | 8 | Network |
| U12AE | F-CAN Malfunction (ICM - Battery ECH) | 7 | Network |
| U12AF | Control Module Overtemperature | 10 | Network |
| U12B0 | Supply Voltage Circuit Low Voltage | 9 | Network |
| U12B1 | Supply Voltage Circuit High Voltage | 9 | Network |
| U12B2 | Digital Audio Broadcast Antenna Circuit | 9 | Network |
| U12D6 | Traction control (anti-slip regulation) failure | 7 | Network |
| U12D9 | Communication error with network voltage maintenance device ECU | 7 | Network |
| U1300 | Class 2 data link low | 21 | Network |
| U1301 | Class 2 data link high | 22 | Network |
| U1302 | Data Length Error | 20 | Network |
| U1303 | Programming mode active message not received | 23 | Network |
| U1305 | No communication with the steering angle sensor (SAS) | 22 | Network |
| U1306 | Data Length Error | 15 | Network |
| U1307 | Lost communication with trailer interface control module | 19 | Network |
| U1308 | No communication with engine control unit | 20 | Network |
| U1309 | No communication with A/T ECU | 21 | Network |
| U1310 | Automatic transmission electrical control failure | 21 | Network |
| U1311 | Data Length Error | 20 | Network |
| U1313 | Communication failure with ABS or ABS/ESP | 23 | Network |
| U1314 | Data Length Error | 19 | Network |
| U1318 | Communication failure with Built-in System Interface (BSI) | 19 | Network |
| U1319 | Automatic release electronic parking brake fault | 18 | Network |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.