Fault code lookup

NetworkU1262

Serious

Severity: Serious - have it checked soon

J1850 SCP Comm Bus Fault - Instr Clstr

13 brands affected · Description from GM data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 13

BrandCodeDescriptionSystem
DaewooU1262J1850 SCP Comm Bus Fault - Instr Clstr BrandNetwork
DFFSU1262Vehicle distance alarm ECU sends disabled data BrandNetwork
EOBDU1262Motor flap suhu BrandNetwork
FordU1262Note: Either DTC(Diagnostic Trouble Codes) U1147 or (both with flash code16) may be raised during the PATS(Passive Anti Theft System) selector process BrandNetwork
GMU1262J1850 SCP Comm Bus Fault - Instr Clstr BrandNetwork
HoldenU1262Invalid Data Received From Cruise Control Module BrandNetwork
HondaU1262No description available Network
Land RoverU1262No description available Network
MazdaU1262Note: Either DTC(Diagnostic Trouble Codes) U1147 or (both with flash code16) may be raised during the PATS(Passive Anti Theft System) selector process BrandNetwork
OpelU1262J1850 SCP Comm Bus Fault - Instr Clstr BrandNetwork
PeugeotU1262No description available Network
ProtonU1262No description available Network
SaabU1262J1850 SCP Comm Bus Fault - Instr Clstr BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 1

These 7-character codes are manufacturer-specific variants of U1262 and may be reported by some scan tools.

BrandCodeDescriptionSystem
SsangYongU126283CAN communication: Electric Power Steering (EPS) checksum error (231) BrandNetwork

6Related codes

Browse Uxxx codes or U126xx codes.

OpenDTC - independent fault code reference