MAYBACH fault codes
Coverage shown is Mercedes-Benz data: 20,291 codes · 1,724 vehicle records · 258 ECU records · 56,350 live-data parameters.
MAYBACH shares fault-code data with Mercedes-Benz. Data may not cover MAYBACH-specific systems.
Codes 20,291
| Code | Description | Brands | System |
|---|---|---|---|
| U0168FF | Communication with the electronic ignition lock has a malfunction. Counter byte when corresponding SAE Code is used more than one time | 1 | Network |
| U016986 | Communication with the overhead control panel has a malfunction. Signal error. | 1 | Network |
| U016987 | Communication with the overhead control panel has a malfunction. Missing message. | 1 | Network |
| U016A83 | Protocol Error POS | 1 | Network |
| U016A87 | Lost Communication POS | 1 | Network |
| U016B | Lost Communication With A/C Compressor Control Module | 14 | Network |
| U019787 | Communication with control unit 'Communication' has a malfunction. Missing Message. | 1 | Network |
| U019900 | Communication with control unit 'Front door (driver-side)' has a malfunction. | 1 | Network |
| U019908 | Botschaft vom Türsteuergerät wird zeitweise nicht empfangen | 1 | Network |
| U019929 | Messages from DM_FL SG cause a signal error in the IDC. | 1 | Network |
| U019987 | Communication with control unit 'Front door (driver-side)' has a malfunction. The message is missing. | 1 | Network |
| U019B | Lost Communication With Battery Charger Control Module A | 14 | Network |
| U019B00 | Communication with the on-board charger has a malfunction. | 1 | Network |
| U019B04 | Communication with the on-board charger has a malfunction. There is an internal fault. | 1 | Network |
| U019B05 | Communication with the on-board charger has a malfunction. There is a programming fault. | 1 | Network |
| U019B08 | Communication with the on-board charger has a malfunction. There is a signal fault or the message is faulty. | 1 | Network |
| U019B13 | Communication with the on-board charger has a malfunction - There is an open circuit. | 1 | Network |
| U019B14 | Communication with the on-board charger has a malfunction - There is a short circuit to ground or an open circuit. | 1 | Network |
| U019B26 | Communication with the on-board charger has a malfunction. The signal change rate is below the permissible limit value. | 1 | Network |
| U019B29 | Communication with the on-board charger has a malfunction. There is an invalid signal. | 1 | Network |
| U019B2F | Communication with the on-board charger has a malfunction. There is an erratic signal. | 1 | Network |
| U019BFA | Communication with the on-board charger has a malfunction. Internal CAN CRC. | 1 | Network |
| U019F00 | Communication with the coolant pump has a malfunction. | 1 | Network |
| U019F87 | Communication with the coolant pump has a malfunction. The message is missing. | 1 | Network |
| U01A0 | Lost Communication With Hybrid/EV Battery Interface Control Module A | 11 | Network |
| U01A000 | Internal communication of the high-voltage battery module with sensor module A has a malfunction. | 1 | Network |
| U01A081 | Internal communication of the high-voltage battery module with sensor module A has a malfunction. Invalid Serial Data Received - invalid serial data received | 1 | Network |
| U01A1 | Lost Communication With Hybrid/EV Battery Interface Control Module B | 10 | Network |
| U01A100 | FUSI_Cell temperature CAN signal transmit error(timeout) | 1 | Network |
| U01A101 | FUSI_Cell temperature CAN signal transmit error(E2E) | 1 | Network |
| U01A200 | Communication fault with DCB | 1 | Network |
| U01A201 | FUSI_CVS temperature CAN signal transmit error(E2E)(shunt temperature) | 1 | Network |
| U01A300 | Communication fault with DCDC | 1 | Network |
| U01A301 | FUSI_pack voltage CAN signal transmit error(E2E) | 1 | Network |
| U01A400 | Communication fault with OBC | 1 | Network |
| U01A401 | FUSI_Current CAN signal transmit error(E2E) | 1 | Network |
| U01A500 | Busoff fault | 1 | Network |
| U01B0 | Lost Communication With Battery Monitor Module | 16 | Network |
| U01B000 | Communication with the hardware monitoring function of the high-voltage battery has a malfunction. | 2 | Network |
| U01B087 | Communication with the hardware monitoring function of the high-voltage battery has a malfunction. Missing Message. | 1 | Network |
| U01B08F | Communication with the hardware monitoring function of the high-voltage battery has a malfunction. The signal or message is erratic. | 1 | Network |
| U01BA | Lost communication with parking lock/pawl control module | 6 | Network |
| U01BB | Production Date | 11 | Network |
| U01BB00 | Lost Communication With Battery Charger Control Module 'B'. | 1 | Network |
| U01BB08 | Lost Communication With Battery Charger Control Module 'B'. Bus Signal / Message Failure | 1 | Network |
| U01BB87 | Communication with the on-board DC current charge-connection unit has a malfunction. The message is missing. | 1 | Network |
| U01BC00 | Communication with coolant pump 2 of the charge air cooler has a malfunction. | 1 | Network |
| U01BF | Side aku juhtimismooduliga kadunud | 5 | Network |
| U01C304 | Communication with the electric oil separator has a malfunction. There is an internal fault. | 1 | Network |
| U01D813 | Lost Communication With Ethernet Switch Port | 1 | Network |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.