Fault code lookup

KIA fault codes

Coverage shown is Hyundai data: 7,974 codes · 345 vehicle records · 168 ECU records · 0 live-data parameters.

KIA shares fault-code data with Hyundai. Data may not cover KIA-specific systems.

Browse Hyundai codes

Search these codes

Codes 7,974

CodeDescriptionBrandsSystem
C1673No description available1Chassis
C1674No description available1Chassis
C1675No description available1Chassis
C1676No description available1Chassis
C167682The LKAS module monitors CAN LINE and abnormal MDPS CAN message is received, LKAS sets DTC and turns the MIL on1Chassis
C167683LKAS checks the checksum of a response message from MDPS to determine whether the message is reliable. If the message is not valid, it generates the fault code and turns on the Malfunction Indicator Lamp1Chassis
C1677No description available1Chassis
C1678No description available1Chassis
C1679No description available1Chassis
C1680DTC(Diagnostic Trouble Codes): are not currently stored6Chassis
C1681Front camera feedback fault5Chassis
C1682Front camera current fault5Chassis
C1683Side camera feedback fault5Chassis
C1687Overcurrent detected in driver side camera5Chassis
C168700If MDPS CAN message is not received, IGPM sets DTC1Chassis
C168708If MDPS CAN message is not received, HECU sets DTC1Chassis
C168787The LKAS module monitors CAN LINE and MDPS signal is not received for certain amount of time, LAKS sets DTC and turns the MIL on1Chassis
C1688Automatic Brake Operation Time4Chassis
C168808If abnormal MDPS CAN message is received, HECU sets DTC1Chassis
C168886While communicating with MDPS via CAN, if MDPS does not respond to the control command sent by LKAS, LKAS generates the fault code and turns on the Malfunction Indicator Lamp1Chassis
C168887If abnormal MDPS CAN message is received, LKAS sets DTC and turns the MIL on1Chassis
C168888No description available1Chassis
C1689No description available3Chassis
C168987While communicating with ABS and ESP via CAN lines, if the VSM signal is not received, the LKAS unit generates the fault code but does not turn on the Malfunction Indicator Lamp1Chassis
C1690ECU Relay Failure6Chassis
C169087While communicating with ABS, TCS and ESP via CAN lines, if an invalid VSM signal is received, the LKAS unit generates the fault code and turns on the malfunction indicator lamp1Chassis
C1691No description available3Chassis
C1692No description available1Chassis
C1693No description available2Chassis
C1694No description available4Chassis
C1695No description available3Chassis
C1696No description available3Chassis
C169600If SPAS CAN message is not received, IGPM sets DTC1Chassis
C1697Camera position adjustment incomplete5Chassis
C1698Forward Collision Warning (FCW) Human Machine Interface (HMI) module fault3Chassis
C169800No description available1Chassis
C1699Internal CAN network - Camera failure4Chassis
C16BANo description available1Chassis
C1700Ground connection X1354215Chassis
C170100Coding error2Chassis
C1702Ground connection X1354214Chassis
C170204If the engine displacement, type and transmission data via CAN message is different compared to data from EEPROM, HECU sets DTC1Chassis
C170246LKAS ECU checks the internally stored local code settings. If no setting is made, it sets DTC1Chassis
C170255If variant code error is detected, BSD ECU sets DTC2Chassis
C1704Left front center sensor internal fault16Chassis
C1705Right front center sensor internal fault16Chassis
C1706Right front corner sensor internal fault14Chassis
C1707Internal fault of front right edge sensor14Chassis
C1708Internal fault of the right rear sensor11Chassis
C1709Right rear corner sensor internal fault11Chassis

Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.

OpenDTC - independent fault code reference