SENOVA(BAIC) fault codes
Coverage shown is BAIC Motor data: 5,084 codes · 82 vehicle records · 0 ECU records · 0 live-data parameters.
SENOVA(BAIC) shares fault-code data with BAIC Motor. Data may not cover SENOVA(BAIC)-specific systems.
Codes 5,084
| Code | Description | Brands | System |
|---|---|---|---|
| P0C85 | Lighting control failure | 22 | Powertrain |
| P0C86 | Faulty button at the bottom of the lighting control lever | 19 | Powertrain |
| P0C87 | The button at the bottom of the wiper control lever is faulty | 19 | Powertrain |
| P0D11 | Right side lock opening actuator failure | 23 | Powertrain |
| P0FD4 | normal fuel level rail pressure found fault | 1 | Powertrain |
| P0FFF | Time Reference High Res Signal A Erratic Pulses | 17 | Powertrain |
| P1000 | OBD-II Monitor Testing Incomplete | 33 | Powertrain |
| P1001 | Short circuit to positive | 32 | Powertrain |
| P1004 | Torque Difference Cylinder 1: Limit Value Exceeded | 25 | Powertrain |
| P1005 | Manifold tuning valve control performance | 27 | Powertrain |
| P1006 | Torque Difference Cylinder 3: Limit Value Exceeded | 23 | Powertrain |
| P1007 | Gradient monitoring | 23 | Powertrain |
| P1008 | Power Steering Circ Low | 19 | Powertrain |
| P1009 | Mass air flow sensor 1/2: implausible signal from load Calculation; Mechanical failure | 25 | Powertrain |
| P100B | VVEL system (bank 2) | 19 | Powertrain |
| P100E | Torque intervention to protect turbocharger | 16 | Powertrain |
| P1024 | Fault, lower learning window | 21 | Powertrain |
| P1025 | no stops learned | 24 | Powertrain |
| P1026 | VVL Systems 1 Performance | 19 | Powertrain |
| P1027 | Clutch power supply | 23 | Powertrain |
| P1028 | Intake manifold tuning valve control circuit: open circuit; Mechanical failure | 20 | Powertrain |
| P1029 | Temperature, electric motor, too high | 21 | Powertrain |
| P1030 | Position-controller monitoring | 24 | Powertrain |
| P1031 | Direction-of-rotation detection | 31 | Powertrain |
| P1032 | Sensor for NOx (G295): signal too high; Open or short to plus | 27 | Powertrain |
| P1033 | Sensor for NOx (G295): signal too low; Open circuit | 24 | Powertrain |
| P1034 | Fault control unit | 24 | Powertrain |
| P1035 | Signal implausible | 27 | Powertrain |
| P1036 | No signal | 21 | Powertrain |
| P1037 | No signal | 22 | Powertrain |
| P1038 | Park/Neutral Line Hi | 21 | Powertrain |
| P1039 | Park/Neutral Line Low | 19 | Powertrain |
| P1040 | Brake pressure senor | 22 | Powertrain |
| P1041 | EEPROM fault | 22 | Powertrain |
| P1042 | Phase A overtemperature | 20 | Powertrain |
| P1043 | ROM fault | 22 | Powertrain |
| P1044 | Reductant pump high control circuit high voltage | 21 | Powertrain |
| P1045 | Shift Lamp Circ Open | 20 | Powertrain |
| P1046 | Reductant purge valve high control circuit high voltage | 21 | Powertrain |
| P1047 | Short circuit to positive | 22 | Powertrain |
| P1048 | Short circuit to negative | 24 | Powertrain |
| P104A | Reductant level sensor 2 performance | 18 | Powertrain |
| P104B | Variable Geometry Turbo (VGT) internal fault | 14 | Powertrain |
| P104C | Variable Geometry Turbo (VGT) drive power supply fault | 13 | Powertrain |
| P1053 | exhaust cam adjustment valve 2 (N319): short to ground; No or incorrect basic setting / adaptation | 21 | Powertrain |
| P1054 | exhaust cam adjustment valve 2 (N319): open circuit; Short to plus | 21 | Powertrain |
| P1061 | Speed, charge limitation | 23 | Powertrain |
| P1062 | Full-stroke position cannot be reached | 20 | Powertrain |
| P1069 | Nitrogen oxides (NOX) sensor - heater control - short to earth | 20 | Powertrain |
| P106B | Stop/start capacitor control module battery negative circuit driver 1 or 2 stuck open | 18 | Powertrain |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.