Results for “C101”
Fault codes 78
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| C1010 | Tandem brake master cylinder, pressure sensor 1: Signal offset | 22 | Chassis |
| C1011 | Tandem brake master cylinder, pressure sensor 2: Signal offset | 21 | Chassis |
| C1012 | Tandem brake master cylinder, pressure sensor 1: General electrical fault | 22 | Chassis |
| C1013 | Tandem brake master cylinder, pressure sensor 2: General electrical fault | 18 | Chassis |
| C1014 | Brake System Total Volume Balance | 21 | Chassis |
| C1015 | Vacuum supply | 17 | Chassis |
| C1016 | Pressure sensor: Adjustment necessary | 14 | Chassis |
| C1017 | Boot/trunk primary switch | 16 | Chassis |
| C1018 | Regenerative Braking | 16 | Chassis |
| C1019 | Left Front wheelspeed sensor airgap too large | 7 | Chassis |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| C101A | Vacuum pressure sensor | 6 | Chassis |
| C101B | Vacuum Pressure Sensor Circuit B | 6 | Chassis |
| C101C | Motor drive IC fault | 8 | Chassis |
| C101D | Controller not configured | 4 | Chassis |
| C101E | Controller calibration program failed to flash | 3 | Chassis |
| C101F | Limit position corner not learned | 6 | Chassis |
| C101000 | Steuergerät Ventil LPF1 elektrischer Fehler | 2 | Chassis |
| C101100 | Steuergerät Ventil MCI1 elektrischer Fehler | 3 | Chassis |
| C101101 | Wheel speed sensor front-LH open/short | 1 | Chassis |
| C101107 | The left rear brake caliper has a malfunction. Counter byte when corresponding SAE Code is used more than one time | 1 | Chassis |
| C101111 | The left rear brake caliper has a malfunction. There is a short circuit to ground. | 1 | Chassis |
| C10114B | The left rear brake caliper has a malfunction. There is a fault due to overtemperature. | 1 | Chassis |
| C101161 | The left rear brake caliper has a malfunction. The signal calculation is faulty. | 1 | Chassis |
| C101177 | The left rear brake caliper has a malfunction. The commanded position cannot be reached. | 1 | Chassis |
| C101195 | The left rear brake caliper has a malfunction. The mechanical setup is not OK. | 1 | Chassis |
| Code | Description | Brands | System |
|---|---|---|---|
| C101A | Vacuum pressure sensor | 6 | Chassis |
| C101B | Vacuum Pressure Sensor Circuit B | 6 | Chassis |
| C101C | Motor drive IC fault | 8 | Chassis |
| C101D | Controller not configured | 4 | Chassis |
| C101E | Controller calibration program failed to flash | 3 | Chassis |
| C101F | Limit position corner not learned | 6 | Chassis |
| C101000 | Steuergerät Ventil LPF1 elektrischer Fehler | 2 | Chassis |
| C101100 | Steuergerät Ventil MCI1 elektrischer Fehler | 3 | Chassis |
| C101101 | Wheel speed sensor front-LH open/short | 1 | Chassis |
| C101107 | The left rear brake caliper has a malfunction. Counter byte when corresponding SAE Code is used more than one time | 1 | Chassis |
| C101111 | The left rear brake caliper has a malfunction. There is a short circuit to ground. | 1 | Chassis |
| C10114B | The left rear brake caliper has a malfunction. There is a fault due to overtemperature. | 1 | Chassis |
| C101161 | The left rear brake caliper has a malfunction. The signal calculation is faulty. | 1 | Chassis |
| C101177 | The left rear brake caliper has a malfunction. The commanded position cannot be reached. | 1 | Chassis |
| C101195 | The left rear brake caliper has a malfunction. The mechanical setup is not OK. | 1 | Chassis |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.