Results for “C”
Fault codes 9,949
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| C1013 | Tandem brake master cylinder, pressure sensor 2: General electrical fault | 18 | Chassis |
| C1014 | Brake System Total Volume Balance | 21 | Chassis |
| C1015 | Vacuum supply | 17 | Chassis |
| C1016 | Pressure sensor: Adjustment necessary | 14 | Chassis |
| C1017 | Boot/trunk primary switch | 16 | Chassis |
| C1018 | Regenerative Braking | 16 | Chassis |
| C1019 | Left Front wheelspeed sensor airgap too large | 7 | Chassis |
| C101A | Vacuum pressure sensor | 6 | Chassis |
| C101B | Vacuum Pressure Sensor Circuit B | 6 | Chassis |
| C101C | Motor drive IC fault | 8 | Chassis |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| C101D | Controller not configured | 4 | Chassis |
| C101E | Controller calibration program failed to flash | 3 | Chassis |
| C101F | Limit position corner not learned | 6 | Chassis |
| C1020 | Diaphragm travel sensor: Signal faulty | 16 | Chassis |
| C1021 | ECU internal fault (temperature sensor system) | 23 | Chassis |
| C1022 | Boot/Trunk Secondary Switch | 17 | Chassis |
| C1023 | Pull Drift Compensation Limit Exceeded | 13 | Chassis |
| C1024 | System temporarily disabled due to power interruption during driving | 11 | Chassis |
| C1025 | Brake Primary Circuit Over Boost Pressure | 14 | Chassis |
| C1026 | ABS Secondary Circuit Over Boost Pressure | 13 | Chassis |
| C1027 | Master Cylinder (MC) To Primary Circuit Pressure | 11 | Chassis |
| C1028 | ABS Primary Circuit Wheel Pressure | 15 | Chassis |
| C1029 | ABS primary circuit pressure lower than secondary pressure | 7 | Chassis |
| C102A | Brake Secondary Circuit Pressure Mismatch Between Wheels | 13 | Chassis |
| C102B | ABS Secondary Circuit Pressure Lower Than Primary | 7 | Chassis |
| Code | Description | Brands | System |
|---|---|---|---|
| C101D | Controller not configured | 4 | Chassis |
| C101E | Controller calibration program failed to flash | 3 | Chassis |
| C101F | Limit position corner not learned | 6 | Chassis |
| C1020 | Diaphragm travel sensor: Signal faulty | 16 | Chassis |
| C1021 | ECU internal fault (temperature sensor system) | 23 | Chassis |
| C1022 | Boot/Trunk Secondary Switch | 17 | Chassis |
| C1023 | Pull Drift Compensation Limit Exceeded | 13 | Chassis |
| C1024 | System temporarily disabled due to power interruption during driving | 11 | Chassis |
| C1025 | Brake Primary Circuit Over Boost Pressure | 14 | Chassis |
| C1026 | ABS Secondary Circuit Over Boost Pressure | 13 | Chassis |
| C1027 | Master Cylinder (MC) To Primary Circuit Pressure | 11 | Chassis |
| C1028 | ABS Primary Circuit Wheel Pressure | 15 | Chassis |
| C1029 | ABS primary circuit pressure lower than secondary pressure | 7 | Chassis |
| C102A | Brake Secondary Circuit Pressure Mismatch Between Wheels | 13 | Chassis |
| C102B | ABS Secondary Circuit Pressure Lower Than Primary | 7 | Chassis |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.