Results for “P”
Fault codes 32,087
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| P1176 | Bank1: O2 (Lambda) Correction Behind Catalyst: Control Limit Reached | 21 | Powertrain |
| P1177 | Bank2: O2 (Lambda) Correction Behind Catalyst: Control Limit Reached | 23 | Powertrain |
| P1178 | DME: Switch time, ox.sensor, bank 1 | 21 | Powertrain |
| P1179 | DME: Switch time, ox.sensor, bank 2 | 21 | Powertrain |
| P117A | Engine Oil Over Temperature - Forced Limited Power | 12 | Powertrain |
| P117B | Air fuel ratio (bank 2) | 9 | Powertrain |
| P117C | behind Cat: Lean control limit exceeded; Upper limit exceeded | 6 | Powertrain |
| P117D | behind Cat: rich control limit exceeded; Cannot be tested at this time | 6 | Powertrain |
| P117E | behind Cat: Lean control limit exceeded; Mechanical failure | 7 | Powertrain |
| P117F | behind Cat: rich control limit exceeded; Lower limit exceeded | 12 | Powertrain |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| P1180 | DME: Jump time, ox.sensor after cat.conv., bank 1 | 27 | Powertrain |
| P1181 | DME: Jump time, ox.sensor after cat.conv., bank 2 | 26 | Powertrain |
| P1182 | Brake circuit vacuum sensor signal failure | 23 | Powertrain |
| P1183 | Vacuum pump sensor failure | 24 | Powertrain |
| P1184 | DME: ACAT sensor, signal after SA, implausible, bank 1 | 24 | Powertrain |
| P1185 | DME: ACAT sensor, signal after SA, implausible, bank 2 | 23 | Powertrain |
| P1186 | DME: Heat output, ox.sensor after cat.conv., bank 1 | 25 | Powertrain |
| P1187 | DME: Heat output, ox.sensor after cat.conv., bank 2 | 23 | Powertrain |
| P1188 | DME: Fuel trim bank 1, permissible range exceeded | 23 | Powertrain |
| P1189 | DME: Fuel trim bank 2, permissible range exceeded | 24 | Powertrain |
| P118A | sensor 1: voltage too low / air leak; Open or short to plus | 12 | Powertrain |
| P118B | sensor 1: voltage too low / air leak; Open circuit | 12 | Powertrain |
| P118C | Oxygen (Lambda) sensor: B3 S2: signal too Lean; Lower limit exceeded | 12 | Powertrain |
| P118D | Oxygen (Lambda) sensor: B3 S2: signal too rich; Mechanical failure | 12 | Powertrain |
| P118E | Oxygen (Lambda) sensor: B4 S2: signal too Lean; No or incorrect basic setting / adaptation | 11 | Powertrain |
| Code | Description | Brands | System |
|---|---|---|---|
| P1180 | DME: Jump time, ox.sensor after cat.conv., bank 1 | 27 | Powertrain |
| P1181 | DME: Jump time, ox.sensor after cat.conv., bank 2 | 26 | Powertrain |
| P1182 | Brake circuit vacuum sensor signal failure | 23 | Powertrain |
| P1183 | Vacuum pump sensor failure | 24 | Powertrain |
| P1184 | DME: ACAT sensor, signal after SA, implausible, bank 1 | 24 | Powertrain |
| P1185 | DME: ACAT sensor, signal after SA, implausible, bank 2 | 23 | Powertrain |
| P1186 | DME: Heat output, ox.sensor after cat.conv., bank 1 | 25 | Powertrain |
| P1187 | DME: Heat output, ox.sensor after cat.conv., bank 2 | 23 | Powertrain |
| P1188 | DME: Fuel trim bank 1, permissible range exceeded | 23 | Powertrain |
| P1189 | DME: Fuel trim bank 2, permissible range exceeded | 24 | Powertrain |
| P118A | sensor 1: voltage too low / air leak; Open or short to plus | 12 | Powertrain |
| P118B | sensor 1: voltage too low / air leak; Open circuit | 12 | Powertrain |
| P118C | Oxygen (Lambda) sensor: B3 S2: signal too Lean; Lower limit exceeded | 12 | Powertrain |
| P118D | Oxygen (Lambda) sensor: B3 S2: signal too rich; Mechanical failure | 12 | Powertrain |
| P118E | Oxygen (Lambda) sensor: B4 S2: signal too Lean; No or incorrect basic setting / adaptation | 11 | Powertrain |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.