Fault code lookup

NetworkU150B

Serious

Severity: Serious - have it checked soon

Column SW LIN checksum error

11 brands affected · Description from Mitsubishi data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 11

BrandCodeDescriptionSystem
Mercedes-BenzU150BNo description available Network
DaewooU150BNo description available Network
GMU150BNo description available Network
HoldenU150BLIN Bus BrandNetwork
MitsubishiU150BColumn SW LIN checksum error BrandNetwork
OpelU150BNo description available Network
PeugeotU150BNo description available Network
ProtonU150BColumn SW LIN checksum error BrandNetwork
SaabU150BNo description available Network
SprinterU150BNo description available Network
SuzukiU150BECM CAN CIRC 3 BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 1

These 7-character codes are manufacturer-specific variants of U150B and may be reported by some scan tools.

BrandCodeDescriptionSystem
SsangYongU150B00CAN: Error in Ignition switch signal value: inconsistentID-length BrandNetwork

6Related codes

Browse Uxxx codes or U150xx codes.

OpenDTC - independent fault code reference