Fault code lookup

NetworkU0599

Serious

Severity: Serious - have it checked soon

Invalid Data Received From DC/DC Converter Control Module A

25 brands affected · Generic SAE J2012 description.

Key terms: Control module: a small computer that runs one part of the car · SAE J2012: the standard generic code list

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 25

BrandCodeDescriptionSystem
Ashok Leyland CVU0599Ecomet/Boss/Guru 10xx BS-III/IV BrandNetwork
BAIC MotorU0599Invalid Data Received From DC to DC Converter Control Module A BrandNetwork
BYDU0599Invalid Data Received From DC to DC Converter Control Module A BrandNetwork
CheryU0599Invalid data received from DCDC BrandNetwork
DaewooU0599Invalid Data Received From DC to DC Converter Control Module A BrandNetwork
DFFSU0599Invalid data signal received from DC/DC converter BrandNetwork
DFFXU0599Invalid Data Received From DC to DC Converter Control Module A BrandNetwork
DFXKU0599Invalid Data Received From DC to DC Converter Control Module A BrandNetwork
EOBDU0599Kehtetu andmevoog DC/DC muundurijuhtimismoodulilt A BrandNetwork
GeelyU0599Invalid Data Received From DC to DC Converter Control Module A BrandNetwork
GMU0599Invalid Data Received From DC to DC Converter Control Module A BrandNetwork
Great WallU0599Invalid Data Received From DC to DC Converter Control Module A BrandNetwork
HafeiU0599Invalid Data Received From DC to DC Converter Control Module A BrandNetwork
HoldenU0599Invalid Data Received From DC/DC Converter Control Module A SAENetwork
HondaU0599Invalid Data Received From DC/DC Converter Control Module A SAENetwork
HyundaiU0599Invalid Data Received From DC/DC Converter Control Module A SAENetwork
Land RoverU0599Invalid Data Received From DC To DC Converter Control Module A BrandNetwork
OpelU0599Invalid Data Received From DC to DC Converter Control Module A BrandNetwork
PeugeotU0599Invalid Data Received From DC/DC Converter Control Module A SAENetwork
ProtonU0599Invalid Data Received From DC/DC Converter Control Module A SAENetwork
SaabU0599Invalid Data Received From DC to DC Converter Control Module A BrandNetwork
MG (SAIC)U0599Invalid data received from high voltage DCDC BrandNetwork
SubaruU0599Invalid Data Received From DC/DC Converter Control Module A SAENetwork
SuzukiU0599DC/DC CNVRTR C/M A BrandNetwork
ToyotaU0599Invalid data signal received from DC/DC converter BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 1

These 7-character codes are manufacturer-specific variants of U0599 and may be reported by some scan tools.

BrandCodeDescriptionSystem
PorscheU059900Displaycode BrandNetwork

6Related codes

Browse Uxxx codes or U059xx codes.

OpenDTC - independent fault code reference