Fault code lookup

NetworkU0595

Serious

Severity: Serious - have it checked soon

Invalid data received from powertrain control monitor module

21 brands affected · Description from Toyota data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 21

BrandCodeDescriptionSystem
Ashok Leyland CVU0595No description available Network
BAIC MotorU0595Invalid Data Received From Powertrain Control Monitor Module BrandNetwork
BYDU0595Invalid Data Received From Powertrain Control Monitor Module BrandNetwork
CheryU0595Invalid BMS signal received BrandNetwork
DaewooU0595Invalid Data Received From Powertrain Control Monitor Module BrandNetwork
DFFSU0595Invalid Data Received From Powertrain Control Monitor Module BrandNetwork
DFFXU0595Invalid Data Received From Powertrain Control Monitor Module BrandNetwork
DFXKU0595Invalid Data Received From Powertrain Control Monitor Module BrandNetwork
EOBDU0595Kehtetu andmevoog jõuülekande juhtimismoodulilt BrandNetwork
GeelyU0595Invalid Data Received From Powertrain Control Monitor Module BrandNetwork
GMU0595Invalid Data Received From Powertrain Control Monitor Module BrandNetwork
Great WallU0595Invalid Data Received From Powertrain Control Monitor Module BrandNetwork
HafeiU0595Invalid Data Received From Powertrain Control Monitor Module BrandNetwork
HoldenU0595Invalid Data Received From Powertrain Control Monitor Module BrandNetwork
HyundaiU0595No description available Network
Land RoverU0595Invalid Data Received From Powertrain Control Monitor Module BrandNetwork
OpelU0595Invalid Data Received From Powertrain Control Monitor Module BrandNetwork
PeugeotU0595No description available Network
SaabU0595Invalid Data Received From Powertrain Control Monitor Module BrandNetwork
MG (SAIC)U0595Invalid Data Received From Powertrain Control Monitor Module BrandNetwork
ToyotaU0595Invalid data received from powertrain control monitor module BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 9

These 7-character codes are manufacturer-specific variants of U0595 and may be reported by some scan tools.

BrandCodeDescriptionSystem
Mercedes-BenzU059504Implausible data were received from control unit 'Drivetrain'. There is an internal fault. BrandNetwork
Mercedes-BenzU059508Implausible data were received from control unit 'Drivetrain'. There is a signal fault or the message is faulty. BrandNetwork
Mercedes-BenzU059525Implausible data were received from control unit 'Drivetrain'. There is a faulty signal waveform. BrandNetwork
Mercedes-BenzU059526Implausible data were received from control unit 'Drivetrain'. The signal change rate is below the permissible limit value. BrandNetwork
Mercedes-BenzU059527Implausible data were received from control unit 'Drivetrain'. The signal change rate is above the permissible limit value. BrandNetwork
Mercedes-BenzU059528Implausible data were received from control unit 'Drivetrain'. The signal offset is outside the permissible range. BrandNetwork
Mercedes-BenzU059531Implausible data were received from control unit 'Drivetrain'. The signal is not present. BrandNetwork
Mercedes-BenzU059587Implausible data were received from control unit 'Drivetrain'. The message is missing. BrandNetwork
Mercedes-BenzU059591Implausible data were received from control unit 'Drivetrain'. The parameter is outside the permissible range. BrandNetwork

6Related codes

Browse Uxxx codes or U059xx codes.

OpenDTC - independent fault code reference