Fault code lookup

NetworkU0403

Serious

Severity: Serious - have it checked soon

Invalid Data Received From Transfer Case Control Module

31 brands affected · Generic SAE J2012 description.

Key terms: Control module: a small computer that runs one part of the car · SAE J2012: the standard generic code list

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 31

BrandCodeDescriptionSystem
Ashok Leyland CVU0403Hydraulic Pump Relay Circuit/Open BrandNetwork
BAIC MotorU0403Invalid Data Received From Transfer Case Control Module BrandNetwork
BYDU0403Invalid Data Received From Transfer Case Control Module BrandNetwork
CheryU0403Invalid Data Received From Transfer Case Control Module BrandNetwork
ChryslerU0403Implausible Data Received From T-Case BrandNetwork
DaewooU0403Invalid Data Received From Transfer Case Control Module BrandNetwork
DFFSU0403Invalid Data Received From Transfer Case Control Module BrandNetwork
DFFXU0403Invalid Data Received From Transfer Case Control Module BrandNetwork
DFXKU0403Invalid Data Received From Transfer Case Control Module BrandNetwork
EOBDU0403Kehtetu andme saamine ülekandejuhtimismoodulilt BrandNetwork
FiatU0403Implausible data received from T-Case BrandNetwork
FordU0403Invalid Data Received From Transfer Case Control Module SAENetwork
GeelyU0403Invalid Data Received From Transfer Case Control Module BrandNetwork
GMU0403Invalid Data Received From Transfer Case Control Module BrandNetwork
Great WallU0403Invalid Data Received From Transfer Case Control Module BrandNetwork
HafeiU0403Invalid Data Received From Transfer Case Control Module BrandNetwork
HoldenU0403Invalid Data Received From Transfer Case Control Module BrandNetwork
HyundaiU0403Invalid Data Received From Transfer Case Control Module SAENetwork
Land RoverU0403Invalid data received from transfer case control module BrandNetwork
MahindraU0403Invalid Data Received From Transfer Case Control Module SAENetwork
MaseratiU0403implausible data received from transfer case BrandNetwork
MazdaU0403Invalid Data Received From Transfer Case Control Module SAENetwork
MitsubishiU0403T/F case control BrandNetwork
OpelU0403Invalid Data Received From Transfer Case Control Module BrandNetwork
PeugeotU0403Invalid Data Received From Transfer Case Control Module SAENetwork
ProtonU0403T/F case control BrandNetwork
SaabU0403Invalid Data Received From Transfer Case Control Module BrandNetwork
MG (SAIC)U0403Invalid Data Received From Transfer Case Control Module BrandNetwork
TataU0403Invalid Data Received From Transfer Case Control Module BrandNetwork
ToyotaU0403Invalid data received from ABS/Electronic Stability Program BrandNetwork
VolkswagenU0403SAE: Invalid Data Received from Transfer Case Control Module BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 4

These 7-character codes are manufacturer-specific variants of U0403 and may be reported by some scan tools.

BrandCodeDescriptionSystem
Mercedes-BenzU040300Implausible data were received from the transfer case. BrandNetwork
SsangYongU040300CAN signals from transfer case are out of range or invalid BrandNetwork
Mercedes-BenzU040329No description available Network
Mercedes-BenzU040383Implausible data were received from the transfer case. The checksum for the message has an incorrect value. BrandNetwork

6Related codes

Browse Uxxx codes or U040xx codes.

OpenDTC - independent fault code reference