NetworkU0133

Serious

Severity: Serious - have it checked soon

Lost Communication With Active Roll Control Module

27 brands affected · Generic SAE J2012 description.

Key terms: Control module: a small computer that runs one part of the car · SAE J2012: the standard generic code list

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

Wiring or connector fault on the communication bus
Faulty control module
Low battery voltage or poor ground
Water ingress in a connector or module
Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 27

Brand	Code	Description	System
Ashok Leyland CV	U0133	Fuel Level Sensor. Sensor C Brand	Network
BAIC Motor	U0133	Lost Communication With Active Roll Control Module Brand	Network
BYD	U0133	Lost Communication With Active Roll Control Module Brand	Network
Chery	U0133	Lost Communication With Active Roll Control Module Brand	Network
Daewoo	U0133	Lost Communication With Active Roll Control Module Brand	Network
DFFS	U0133	Lost Communication With Active Roll Control Module Brand	Network
DFFX	U0133	Lost Communication With Active Roll Control Module Brand	Network
DFXK	U0133	Lost Communication With Active Roll Control Module Brand	Network
EOBD	U0133	Communicatieverlies met actieve rolcontrolemodule Brand	Network
Geely	U0133	Lost Communication With Active Roll Control Module Brand	Network
GM	U0133	Lost Communication With Active Roll Control Module Brand	Network
Great Wall	U0133	Lost Communication With Active Roll Control Module Brand	Network
Hafei	U0133	Lost Communication With Active Roll Control Module Brand	Network
Holden	U0133	Lost Communication with Air Suspension Control Module Brand	Network
Hyundai	U0133	Lost Communication With Active Roll Control Module SAE	Network
Isuzu	U0133	Lost Communication With Active Roll Control Module SAE	Network
Land Rover	U0133	Lost Communication With Active Roll Control Module SAE	Network
Mitsubishi	U0133	ASC CAN timeout Brand	Network
Opel	U0133	Lost Communication With Active Roll Control Module Brand	Network
Peugeot	U0133	Lost Communication With Active Roll Control Module SAE	Network
Porsche	U0133	Lost Communication With Active Roll Control Module SAE	Network
Proton	U0133	ASC CAN timeout Brand	Network
Saab	U0133	Lost Communication With Active Roll Control Module Brand	Network
Maxus (SAIC)	U0133	Lost Communication With EPS Brand	Network
MG (SAIC)	U0133	Lost Communication With EPS Brand	Network
Toyota	U0133	Lost communication with active roll control module Brand	Network
Volkswagen	U0133	SAE: No Communications with Active Roll Control Module Brand	Network

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 4

These 7-character codes are manufacturer-specific variants of U0133 and may be reported by some scan tools.

Brand	Code	Description	System
SsangYong	U013300	CAN communication: Parking Assistance (PRA) message not received Brand	Network
SsangYong	U013381	Variant coding error: Transfer Case Control Unit (TCCU) specification detected Brand	Network
Mercedes-Benz	U013383	Protocol Error EPS Brand	Network
SsangYong	U013387	CAN communication: Transfer Case Control Unit (TCCU) message not received Brand	Network

6Related codes

Browse Uxxx codes or U013xx codes.