Fault code lookup

NetworkU0117

Serious

Severity: Serious - have it checked soon

Lost Communication With PTO Control Module

23 brands affected · Generic SAE J2012 description.

Key terms: Control module: a small computer that runs one part of the car · SAE J2012: the standard generic code list

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 23

BrandCodeDescriptionSystem
Ashok Leyland CVU0117Transmission Friction Element Apply Time. Unit 1. Operation Failure BrandNetwork
BAIC MotorU0117Lost Communication With Electrical PTO Control Module BrandNetwork
BYDU0117Lost Communication With Electrical PTO Control Module BrandNetwork
CheryU0117PTO switch CAN signal fault BrandNetwork
DaewooU0117Lost Communication With Electrical PTO Control Module BrandNetwork
DFFSU0117Lost Communication With Electrical PTO Control Module BrandNetwork
DFFXU0117Lost Communication With Electrical PTO Control Module BrandNetwork
DFXKU0117PTO switch CAN signal fault BrandNetwork
EOBDU0117Kaotatud side PTO juhtmooduliga BrandNetwork
GeelyU0117Lost Communication With PTO Control Module SAENetwork
GMU0117Lost Communication With Electrical PTO Control Module BrandNetwork
Great WallU0117PTO switch CAN signal fault BrandNetwork
HafeiU0117Lost Communication With Electrical PTO Control Module BrandNetwork
HoldenU0117Lost Communication with Power Take-Off Control Module BrandNetwork
HyundaiU0117Lost Communication With PTO Control Module SAENetwork
IsuzuU0117Lost Communication With PTO Control Module SAENetwork
Land RoverU0117Lost Communication With PTO Control Module SAENetwork
OpelU0117Lost Communication With Electrical PTO Control Module BrandNetwork
PeugeotU0117Lost Communication With PTO Control Module SAENetwork
SaabU0117Lost Communication With Electrical PTO Control Module BrandNetwork
MG (SAIC)U0117KL30 Over Voltage BrandNetwork
ToyotaU0117Lost communication with PTO control module BrandNetwork
VolkswagenU0117Lost Communication With PTO Control Module SAENetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Related codes

Browse Uxxx codes or U011xx codes.

OpenDTC - independent fault code reference