Fault code lookup

NetworkU0113

Serious

Severity: Serious - have it checked soon

Lost Communication With Emissions Critical Control Information

25 brands affected · Generic SAE J2012 description.

Key terms: Control module: a small computer that runs one part of the car · SAE J2012: the standard generic code list

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 25

BrandCodeDescriptionSystem
Ashok Leyland CVU0113Lost Communication With Emissions Critical Control Information SAENetwork
BAIC MotorU0113Lost Communication With Emissions Critical Control Information BrandNetwork
BYDU0113Lost Communication With Emissions Critical Control Information BrandNetwork
CheryU0113Lost Communication With Emissions Critical Control Information BrandNetwork
DaewooU0113Lost Communication With Emissions Critical Control Information BrandNetwork
DFFSU0113Lost Communication With Emissions Critical Control Information BrandNetwork
DFFXU0113Lost Communication With Emissions Critical Control Information BrandNetwork
DFXKU0113Lost Communication With Emissions Critical Control Information BrandNetwork
EOBDU0113Kaotatud side heitgaaside kriitilise juhtimisandmega BrandNetwork
GeelyU0113Lost Communication With Emissions Critical Control Information BrandNetwork
GMU0113Lost Communication With Emissions Critical Control Information BrandNetwork
Great WallU0113Lost Communication With Emissions Critical Control Information BrandNetwork
HafeiU0113Lost Communication With Emissions Critical Control Information BrandNetwork
HyundaiU0113Lost Communication With Emissions Critical Control Information SAENetwork
IsuzuU0113Lost Communication With Emissions Critical Control Information SAENetwork
Land RoverU0113Lost Communication With Emissions Critical Control Information BrandNetwork
MaseratiU0113Lost Communication With Emissions Critical Control Information SAENetwork
MitsubishiU0113Lost Communication With Emissions Critical Control Information SAENetwork
NissanU0113Lost Communication With Emissions Critical Control Information SAENetwork
PeugeotU0113Lost Communication With Emissions Critical Control Information SAENetwork
SaabU0113Lost Communication With Emissions Critical Control Information BrandNetwork
MG (SAIC)U0113Lost Communication With Emissions Critical Control Information BrandNetwork
SuzukiU0113CAN COMM CIRCUIT BrandNetwork
TataU0113Lost Communication With Emissions Critical Control Information BrandNetwork
ToyotaU0113Lost communication with emissions critical control information BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 3

These 7-character codes are manufacturer-specific variants of U0113 and may be reported by some scan tools.

BrandCodeDescriptionSystem
SsangYongU011300Fault indicating the battery sensor self diagnosis have failed BrandNetwork
SsangYongU011381Variant coding error: Smart Key Module (SKM) specification detection BrandNetwork
SsangYongU011387CAN communication: Smart Key Module (SKM) message not received BrandNetwork

6Related codes

Browse Uxxx codes or U011xx codes.

OpenDTC - independent fault code reference