Fault code lookup

PowertrainP2195

Caution

Severity: Caution - get it checked when you can

The upstream oxygen is too lean when accelerating and enriching it.

42 brands affected · Description from Toyota data.

Key terms: Control module: a small computer that runs one part of the car · Powertrain: engine, transmission and emissions

1What it means in plain English

The engine or powertrain control system has stored a fault that does not have specific guidance in this database yet.

2Common causes

  1. Sensor or actuator fault
  2. Wiring or connector fault
  3. Vacuum or intake leak
  4. Fuel or ignition problem
  5. Control module fault

3Can I drive?

Caution · drive with care

Have it diagnosed promptly. If the car runs and drives normally, drive gently to a workshop. If it runs badly, stalls, overheats, loses oil pressure, or a warning light is flashing or red, stop safely and get professional help. If the code concerns the brakes, brake vacuum or brake assist, do not drive until it is checked: a hard pedal or longer stopping distance means stop.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 42

BrandCodeDescriptionSystem
Ashok Leyland CVP2195Injector Code 2 BrandPowertrain
BAIC MotorP2195O2 Sensor Signal Stuck Lean BrandPowertrain
Mercedes-BenzP2195No description available Powertrain
BYDP2195O2 sensor signal stuck rich BrandPowertrain
CheryP2195Oxygen sensor inactive BrandPowertrain
ChryslerP2195O2 sensor signal biased/stuck lean bank 1 sensor 1 BrandPowertrain
DaewooP2195O2 Sensor - System Too Lean BrandPowertrain
DaihatsuP2195Oxygen (air/fuel) sensor signal stuck lean BrandPowertrain
DFFSP2195Upstream oxygen sensor signal failure BrandPowertrain
DFFXP2195Oxygen sensor inactive BrandPowertrain
DFXKP2195O2 Sensor Signal Stuck Lean BrandPowertrain
EOBDP2195Oksygensensorsignal skjev/fast mager bank 1 sensor 1 BrandPowertrain
FordP2195Lack Of HO2S11 Switches - Sensor Indicates Lean BrandPowertrain
GeelyP2195Upstream O2 Sensor Aging BrandPowertrain
GMP2195HO2S signal biased lean sensor 1 BrandPowertrain
Great WallP2195Oxygen sensor inactive BrandPowertrain
HafeiP2195Oxygen sensor inactive BrandPowertrain
HoldenP2195HO2S Signal Biased Lean Sensor 1 BrandPowertrain
HondaP2195No description available Powertrain
HyundaiP2195No description available Powertrain
IsuzuP2195No description available Powertrain
Land RoverP2195Oxygen sensor 1-1 - Signal stuck lean BrandPowertrain
MahindraP2195No description available Powertrain
MaseratiP2195Oxygen sensor stuck lean (bank 1 sensor 1) BrandPowertrain
MazdaP2195MIL ON, DTC /P2196 BrandPowertrain
MitsubishiP2195Oxygen sensor inactive BrandPowertrain
OpelP2195HO2S signal biased lean sensor 1 BrandPowertrain
PeroduaP2195Oxygen (air/fuel) sensor signal stuck lean BrandPowertrain
PeugeotP2195No description available Powertrain
PorscheP2195No description available Powertrain
ProtonP2195Oxygen sensor inactive BrandPowertrain
SaabP2195HO2S signal biased lean sensor 1 BrandPowertrain
MG (SAIC)P2195O2 Sensor Signal Biased/Stuck Lean Bank1 Sensor1 BrandPowertrain
SmartP2195No description available Powertrain
SprinterP2195No description available Powertrain
SubaruP2195No description available Powertrain
SuzukiP2195O2 Sensor Signal Biased / Stuck Lean (Bank1 Sensor1) BrandPowertrain
SWM MotorP2195The upstream oxygen sensor is too lean when accelerating and enriching BrandPowertrain
TataP2195O2 Sensor Signal Stuck Lean BrandPowertrain
ToyotaP2195The upstream oxygen is too lean when accelerating and enriching it. BrandPowertrain
VolvoP2195Lack Of HO2S11 Switches - Sensor Indicates Lean BrandPowertrain
VolkswagenP2195Oxygen (Lambda) sensor B1 S1: signal too low (Lean); Defective BrandPowertrain

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 2

These 7-character codes are manufacturer-specific variants of P2195 and may be reported by some scan tools.

BrandCodeDescriptionSystem
HyundaiP219500If the front lambda sensor signal is stuck lean under engine over-run condition, ECM sets BrandPowertrain
SsangYongP219500Front O2 Sensor Signal Biased/Stuck Lean BrandPowertrain

6Related codes

Browse Pxxx codes or P219xx codes.

OpenDTC - independent fault code reference