SsangYong fault codes
4,752 codes · 93 vehicle records · 0 ECU records · 0 live-data parameters
Codes 4,752
| Code | Description | Brands | System |
|---|---|---|---|
| C203500 | Flexray: Signalgruppe LDC_Disp_Stat_IC von EIS/IC nicht korrekt. DataCorrupt-Fehler (Botschaftslaenge oder Botschaftszaehler oder Checksumme) | 2 | Chassis |
| C203568 | Wheel module signal error - position recognition impossible | 1 | Chassis |
| C204100 | Flexray: Signalgruppe TCM_Data3_AR vom CPC/TCM nicht korrekt. DataCorrupt-Fehler (Botschaftslaenge oder Botschaftszaehler oder Checksumme) | 2 | Chassis |
| C204200 | Flexray: Signalgruppe TCM_State3_AR vom CPC/TCM nicht korrekt. DataCorrupt-Fehler (Botschaftslaenge oder Botschaftszaehler oder Checksumme). | 2 | Chassis |
| C204300 | Sensor cluster (body dynamic signals) has sent overvoltage fault | 2 | Chassis |
| C204400 | Sensor cluster (body dynamic signals) has detected CRC-failure in request message | 2 | Chassis |
| C204500 | Sensor cluster (body dynamic signals) has sent undervoltage fault | 2 | Chassis |
| C205100 | Front left wheel module signal reception error | 1 | Chassis |
| C20514B | Left front side wheel module overheating | 1 | Chassis |
| C205200 | Front right wheel module signal reception error | 1 | Chassis |
| C20524B | Right front wheel module overheating | 1 | Chassis |
| C205300 | Rear right wheel module signal reception error | 1 | Chassis |
| C20534B | Right rear wheel module overheating | 1 | Chassis |
| C205400 | Rear left wheel module signal reception error | 1 | Chassis |
| C20544B | Left rear wheel module overheating | 1 | Chassis |
| C206100 | TPMS failure EBS ECU internal | 1 | Chassis |
| C206102 | CAN communication: no communication - bus off | 1 | Chassis |
| C206200 | DTC CAN speed signal missing | 1 | Chassis |
| C206300 | CAN gear position signal missing | 1 | Chassis |
| C206400 | DTC CAN ignition signal missing | 1 | Chassis |
| C206500 | CAN atmospheric pressure signal missing | 1 | Chassis |
| C206501 | CAN Communication: Barometric Pressure Signal Fault | 1 | Chassis |
| C206629 | CAN: wheel speed sensor pulse signal error | 1 | Chassis |
| C206700 | CAN communication: driving information not received | 1 | Chassis |
| C207100 | Poor position recognition in front/rear of vehicle | 1 | Chassis |
| C207200 | To many invalid Ax2 values have been received during calibration sequence | 2 | Chassis |
| C207300 | Unauthenticated wheel module signal detection | 1 | Chassis |
| C207400 | EEPROM handler has detected an EEprom access error while reading or writing (e.g. Checksum, Finalbyte) for second DRS. | 2 | Chassis |
| C208100 | TPMS software incompatible | 1 | Chassis |
| C208200 | Transmitter IDs not programmed | 1 | Chassis |
| C208300 | Sensor cluster 2 (body dynamic signals) has sent overvoltage fault. | 2 | Chassis |
| C209100 | BCM internal error (TPMS control area) | 1 | Chassis |
| C209200 | Local battery voltage too high | 1 | Chassis |
| C209201 | Over voltage(B+) | 1 | Chassis |
| C209300 | Local battery voltage too low | 1 | Chassis |
| C209301 | Under voltage(B+) | 1 | Chassis |
| C209400 | Outside temperature signal missing | 1 | Chassis |
| C209500 | CAN speed signal missing | 1 | Chassis |
| C209600 | CAN communication: startup signal error | 1 | Chassis |
| C209700 | CAN speed signal invalid | 1 | Chassis |
| C209900 | Yrs2 signal value contains Invalid Value pattern | 2 | Chassis |
| C210000 | The power supply clamp 30 is too low. | 2 | Chassis |
| C210074 | Left Electronic Parking Brake (EPB) actuator abnormal operation | 1 | Chassis |
| C210077 | Left Electronic Parking Brake (EPB) actuator stall | 1 | Chassis |
| C210100 | OBD relevant DTC in RBS. For detailed information read Fault Memory of RBS | 2 | Chassis |
| C210174 | Right Electronic Parking Brake (EPB) actuator abnormal operation | 1 | Chassis |
| C210177 | Right Electronic Parking Brake (EPB) actuator stall | 1 | Chassis |
| C211000 | OBD relevant DTC in RBS. For detailed information read Fault Memory of RBS | 2 | Chassis |
| C211013 | Left Electronic Parking Brake (EPB) motor circuit open | 1 | Chassis |
| C211100 | OBD relevant DTC in RBS. For detailed information read Fault Memory of RBS | 2 | Chassis |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.