SsangYong fault codes
4,752 codes · 93 vehicle records · 0 ECU records · 0 live-data parameters
Codes 4,752
| Code | Description | Brands | System |
|---|---|---|---|
| C161608 | If CAN Bus OFF is detected, EPB ECU sets DTC | 2 | Chassis |
| C161687 | CAN communication: no Anti-lock Brake System (ABS)/Electronic Stability Program (ESP) communication - timeout | 1 | Chassis |
| C161688 | If LKAS cannot send or receive a CAN message due to the open or short-circuit of the CAN communication line, the fault code is generated | 2 | Chassis |
| C161700 | RH Actuator low side FET fault | 1 | Chassis |
| C161787 | CAN communication: AVNT communication error - timeout | 1 | Chassis |
| C161800 | CAN communication: Central Gateway (CGW) message not received | 1 | Chassis |
| C161808 | CAN time-out BCM | 1 | Chassis |
| C161887 | CAN communication: Central Gateway (CGW), Adaptive Cruise Control (ACC)/Automatic Emergency Braking (AEB), AVNT timeout | 1 | Chassis |
| C161987 | CAN communication: local CAN (forward collision mitigation - front radar module) communication error - timeout | 1 | Chassis |
| C161991 | CAN communication: local CAN (forward collision mitigation - front radar module) communication error - bus off | 1 | Chassis |
| C161A08 | CAN communication: Motor Control Unit (MCU) message not received | 1 | Chassis |
| C161B08 | CAN communication: Vehicle Control Unit (VCU) message not received | 1 | Chassis |
| C162000 | Longitudinal/Lateral acceleration sensor out of range during calibration (EOL) | 2 | Chassis |
| C162087 | CAN communication: no Forward Collision Mitigation (FCM) communication - timeout | 1 | Chassis |
| C162100 | CAN Communication: ECU Signal Fault | 1 | Chassis |
| C162108 | CAN communication: ECU message error | 1 | Chassis |
| C162181 | CAN communication: ECU signal error | 1 | Chassis |
| C162186 | CAN communication: Engine Management System (EMS) signal error | 1 | Chassis |
| C162200 | CAN Error: Vehical speed signal error | 1 | Chassis |
| C162208 | CAN communication: Transmission Control Unit (TCU) message error | 1 | Chassis |
| C162281 | CAN communication: Transmission Control Unit (TCU) signal error | 1 | Chassis |
| C162286 | CAN Error: Vehical speed signal error | 1 | Chassis |
| C162300 | CAN communication: Vehicle Control Unit (VCU) signal error | 1 | Chassis |
| C162386 | CAN communication: Vehicle Control Unit (VCU) signal error | 1 | Chassis |
| C162400 | CAN: error in SAS signal value (invalid) | 1 | Chassis |
| C162408 | CAN communication: Electric Power Steering (EPS) message error | 1 | Chassis |
| C162481 | CAN communication: Electric Power Steering (EPS) signal error | 1 | Chassis |
| C162482 | CAN communication: Electric Power Steering (EPS) signal error - alive counter | 1 | Chassis |
| C162483 | CAN communication: Electric Power Steering (EPS) signal error - checksum | 1 | Chassis |
| C162486 | CAN communication: Electric Power Steering (EPS)/Steering Angle Sensor (SAS) signal error | 1 | Chassis |
| C162487 | CAN communication: no Electric Power Steering (EPS) communication - timeout | 1 | Chassis |
| C162500 | The valve relay has an electrical fault | 3 | Chassis |
| C162508 | The SCC Module sets DTC when CAN message has not been received from ESP(ESC) via C-CAN | 2 | Chassis |
| C162581 | CAN communication: instrument panel signal error | 1 | Chassis |
| C162586 | CAN Communication: Instrument Cluster Signal Fault | 1 | Chassis |
| C162587 | If ABS/ESC CAN message is not received, LDWS ECU sets DTC | 2 | Chassis |
| C162600 | Der Raddrehzahlsensor vorn links hat Kurzschluss nach Masse. | 2 | Chassis |
| C162608 | CAN communication: Forward Collision Mitigation (FCM) mesh error | 1 | Chassis |
| C162681 | CAN communication: Forward Collision Mitigation (FCM) signal error | 1 | Chassis |
| C162682 | CAN communication: Forward Collision Mitigation (FCM) signal error - alive counter | 1 | Chassis |
| C162683 | CAN communication: Forward Collision Mitigation (FCM) signal error - checksum | 1 | Chassis |
| C162686 | CAN communication: Electronic Stability Control (ESC) signal error | 1 | Chassis |
| C162700 | Der Raddrehzahlsensor vorn links hat Kurzschluss nach Plus. | 3 | Chassis |
| C162781 | CAN communication: Anti-lock Brake System (ABS)/Electronic Stability Program (ESP) signal error | 1 | Chassis |
| C162782 | CAN communication: Anti-lock Brake System (ABS)/Electronic Stability Program (ESP) signal error - alive counter | 1 | Chassis |
| C162783 | CAN communication: Anti-lock Brake System (ABS)/Electronic Stability Program (ESP) signal error - checksum | 1 | Chassis |
| C162800 | Der Raddrehzahlsensor vorn links hat einen elektrischen Fehler oder Unterbrechung. | 3 | Chassis |
| C162808 | If CLU CAN message is not received, HECU sets DTC | 2 | Chassis |
| C162887 | If CLU CAN message is not received, LDWS ECU sets DTC | 2 | Chassis |
| C162890 | CAN communication: Vehicle Control Unit (VCU) message not received - timeout | 1 | Chassis |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.