SsangYong fault codes
4,752 codes · 93 vehicle records · 0 ECU records · 0 live-data parameters
Codes 4,752
| Code | Description | Brands | System |
|---|---|---|---|
| B131100 | Overloaded headlamp low circuit | 2 | Body |
| B131200 | Rain sensor optical fault detected (auto light function) | 2 | Body |
| B131300 | PKE Authentication with ESCL Failure | 2 | Body |
| B131400 | LIN communication failure detected | 1 | Body |
| B131500 | IGN1 hardwire failure | 1 | Body |
| B131600 | Wiper low hardwire failure | 1 | Body |
| B131700 | Head lamp low hardwire failure | 1 | Body |
| B131800 | CAN: key condition message not received(time out)(limp home) | 1 | Body |
| B131900 | CAN: FRT wiper/headlamp mode switch not received(time out)(limp home) | 1 | Body |
| B131A00 | Wiper motor parking position failure | 1 | Body |
| B131B00 | CAN: emergency mode (limp home) | 1 | Body |
| B131C00 | CAN: communication interruption(bus off) | 1 | Body |
| B132600 | The SRSCM sets DTC if there is short to ground in DFIS harness | 2 | Body |
| B132700 | The SRSCM sets DTC if there is short to power harness in DFIS harness | 3 | Body |
| B132800 | The SRSCM sets DTC if there is any fault in Front Impact Sensor(FIS)-Drive | 2 | Body |
| B132900 | The SRSCM sets DTC if there is any error in communication between DFIS and SRSCM | 2 | Body |
| B133000 | The SRSCM sets DTC if DFIS with wrong ID is detected | 2 | Body |
| B133100 | The SRSCM sets DTC if there is short to ground in PFIS harness | 2 | Body |
| B133200 | The SRSCM sets DTC if there is short to power in PFIS harness | 2 | Body |
| B133300 | The SRSCM sets DTC if there is any fault in Front Impact Sensor(FIS)-Drive | 2 | Body |
| B133400 | The SRSCM sets DTC if there is any error in communication between PFIS and SRSCM | 2 | Body |
| B133500 | The SRSCM sets DTC if PFIS with wrong ID is detected | 2 | Body |
| B134600 | The SRSCM sets DTC if the measured resistance value of DAB circuit is more than the threshold value.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B134700 | The SRSCM sets DTC if the measured resistance value of DAB circuit is less than the threshold value*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B134800 | The SRSCM sets DTC if there is a short to ground in DAB harness*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B134900 | The SRSCM sets DTC if there is a short to power in DAB harness*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B135000 | CAN invalid data(SPM detected: quality of vehicle velocity is not sufficient) | 1 | Body |
| B135100 | CAN invalid data(SPM detected: quality of yaw rate is not sufficient) | 1 | Body |
| B135200 | The SRSCM sets DTC if the measured resistance value of PAB circuit is more than the threshold value.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 3 | Body |
| B135300 | The SRSCM sets DTC if the measured resistance value of PAB circuit is less than the threshold value.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B135400 | The SRSCM sets DTC if there is a short to ground in PAB harness*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B135500 | The SRSCM sets DTC if there is a short to power in PAB harness.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B136100 | The SRSCM sets DTC if the measured resistance value of DBPT circuit is more than the threshold value.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B136200 | The SRSCM sets DTC if the measured resistance value of DBPT circuit is less than the threshold value.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B136300 | The SRSCM sets DTC if there is a short to ground in DBPT harness.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B136400 | The SRSCM sets DTC if there is a short to power in DBPT harness.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B136700 | The SRSCM sets DTC if the measured resistance value of PBPT circuit is more than the threshold value.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B136800 | The SRSCM sets DTC if the measured resistance value of PBPT circuit is less than the threshold value.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 3 | Body |
| B136900 | The SRSCM sets DTC if there is a short to ground in PBPT harness.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B136A00 | The SRSCM sets DTC if the measured resistance value of RDBPT circuit is more than the threshold value.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B136B00 | The SRSCM sets DTC if the measured resistance value of RDBPT circuit is less than the threshold value.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B136C00 | The SRSCM sets DTC if there is a short to ground in RDBPT harness.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B136D00 | The SRSCM sets DTC if there is a short to power in RDBPT harness.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B136E00 | The SRSCM sets DTC if the measured resistance value of RPBPT circuit is more than the threshold value.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B136F00 | The SRSCM sets DTC if the measured resistance value of RPBPT circuit is less than the threshold value.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B137000 | The SRSCM sets DTC if there is a short to power in PBPT harness.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 3 | Body |
| B137800 | The SRSCM sets DTC if the measured resistance value of DSAB circuit is more than the threshold value.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B137900 | The SRSCM sets DTC if the measured resistance value of DSAB circuit is less than the threshold value.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B137A00 | The SRSCM sets DTC if there is a short to ground in RPBPT harness.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
| B137B00 | The SRSCM sets DTC if there is a short to power in RPBPT harness.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while | 2 | Body |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.