Opel fault codes
15,060 codes · 16 vehicle records · 175 ECU records · 0 live-data parameters
Codes 15,060
| Code | Description | Brands | System |
|---|---|---|---|
| B1604 | DR pretensioner squib open | 23 | Body |
| B1605 | Battery charging status unit reset | 26 | Body |
| B1606 | Keyless Access Unit lost communication with MICU | 23 | Body |
| B1607 | The air outlet temperature sensor is open-circuited | 24 | Body |
| B160B | Load reduction command to 230 volt unit failed | 12 | Body |
| B1610 | Temperature control circuit short circuit | 26 | Body |
| B1615 | Blowing foot temperature sensor circuit short to power/ground or open | 26 | Body |
| B1619 | DR lap pretensioner squib short | 15 | Body |
| B161A | Temperature control circuit open | 13 | Body |
| B1620 | ECU performance | 21 | Body |
| B1622 | Right mirror vertical position sensor circuit low | 20 | Body |
| B1623 | Ignition positive (+APC) relay failure | 19 | Body |
| B1624 | Driver side airbag deployed | 14 | Body |
| B1625 | DSAB first stage deployment control 0 | 19 | Body |
| B1626 | DSAB second stage deployment control 0 | 16 | Body |
| B1627 | Battery Charge Status Unit - Voltage Sensor Failure | 18 | Body |
| B1628 | Battery charge status unit - current sensor failure | 17 | Body |
| B1629 | Battery charge status unit - temperature sensor failure | 12 | Body |
| B162A | The positive terminal (+CPC) of the central power switch is incorrectly maintained | 12 | Body |
| B162B | CAN Positive relay control and status are inconsistent | 11 | Body |
| B162C | Accessory positive relay control and status are inconsistent | 13 | Body |
| B1630 | Front passenger side airbag not connected | 22 | Body |
| B1635 | PSAB first stage deployment control 0 | 16 | Body |
| B1640 | Left front mirror heater circuit | 15 | Body |
| B1645 | Right front mirror heater circuit | 16 | Body |
| B1650 | Driver air bag deployment commanded | 20 | Body |
| B1651 | LH side air bag deployment commanded | 21 | Body |
| B1652 | Passenger side airbag impacting record | 20 | Body |
| B1655 | Power Window Master Switch Malfunction (Passenger) | 20 | Body |
| B1657 | EEPROM calibration error | 21 | Body |
| B1660 | Front right frontal impact sensor resistance value out of range | 17 | Body |
| B1665 | Inside Rearview Mirror Vertical Position Feedback Circuit | 18 | Body |
| B1670 | Passenger air bag deployment commanded | 17 | Body |
| B1675 | Rear right side impact sensor short to power | 14 | Body |
| B1680 | Front passenger airbag switch not connected | 14 | Body |
| B1685 | Inside Rearview Mirror Horizontal Motor Circuit | 13 | Body |
| B1690 | Air bag ECU fault | 15 | Body |
| B1695 | Power supply voltage too high | 16 | Body |
| B16A7 | Tail lamp(RH) circuit short | 11 | Body |
| B16A8 | Tail lamp(LH) circuit short | 11 | Body |
| B16A9 | Turn lamp(LH) deactivated | 11 | Body |
| B16AA | Turn lamp(RH) deactivated | 10 | Body |
| B16C5 | SRS ECU fault | 9 | Body |
| B16ED | No description available | 7 | Body |
| B16EE | No description available | 7 | Body |
| B16F4 | No description available | 9 | Body |
| B1700 | Odometer data fail | 21 | Body |
| B1701 | Transponder Antenna Fail | 25 | Body |
| B1702 | mirror switch input shorted to ground | 23 | Body |
| B1703 | mirror switch L down input stuck high | 23 | Body |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.