Mazda fault codes
2,569 codes · 32 vehicle records · 9 ECU records · 0 live-data parameters
Codes 2,569
| Code | Description | Brands | System |
|---|---|---|---|
| U1612 | ACC network signal invalid | 14 | Network |
| U1700 | SCU message lost | 24 | Network |
| U1701 | ECM message lost | 20 | Network |
| U1702 | ESC message lost | 19 | Network |
| U1703 | CAN shift lever signal error | 19 | Network |
| U1705 | CAN brake signal error | 19 | Network |
| U1706 | F-CAN Malfunction (EVCC - Ethernet and OTA Unit) | 21 | Network |
| U1710 | Lost Communication with HVAC Control Module | 11 | Network |
| U1711 | TCM communication error | 16 | Network |
| U1715 | Loss Of Front Door Module to Window Motor High Speed Comm | 11 | Network |
| U1724 | Parkeersensornode | 9 | Network |
| U1726 | Lost Communication with Inflatable Restraint Sensing and Diagnostic Module | 9 | Network |
| U1733 | Konvergens telematiknod | 9 | Network |
| U1734 | Lost Communication with Auxiliary Heater Control Module | 10 | Network |
| U1738 | Radio navigator b'mapep | 3 | Network |
| U1739 | Lost Communication with Battery Sensor Module | 9 | Network |
| U1750 | HDD invalid media | 4 | Network |
| U1794 | Vastust ei saadud A moodulilt sidevõrgust, kui oli vaja teatud andmeid | 4 | Network |
| U1797 | Vastust ei saadud A moodulilt sidevõrgust, kui oli vaja teatud andmeid | 3 | Network |
| U1798 | Ei vastust A moodulilt sidevõrgust, kui oli vaja teatud andmeid | 3 | Network |
| U1800 | Controller Area Network (CAN) Bus Communication | 18 | Network |
| U1801 | Alive counter received from Electronic Stability Program (ESP) invalid | 16 | Network |
| U1812 | Moodul A ei reageerinud sidevõrgus, kui oli vaja teatud andmeid | 3 | Network |
| U1820 | CAN-C (sub) bas | 12 | Network |
| U1821 | Brake system failure | 12 | Network |
| U1822 | Bus-off (CAN-C sub) | 11 | Network |
| U1834 | Vastust ei saadud A moodulilt sidevõrgust, kui oli vaja teatud andmeid | 3 | Network |
| U1851 | No description available | 6 | Network |
| U1855 | No description available | 6 | Network |
| U1856 | No description available | 6 | Network |
| U18A0 | Universal Serial Bus Device | 9 | Network |
| U1A00 | No description available | 4 | Network |
| U1A04 | Vehicle speed CAN signal | 4 | Network |
| U1A4B | Make sure the configuration has been done and any DTC except U3000_54 and _54 is not stored in module before continuing | 3 | Network |
| U1B01 | 87 = ECM Signal Not Received | 6 | Network |
| U1F2D | Lost communication with engine fuse box | 9 | Network |
| U1F2F | Lost communication with transmission ECU | 9 | Network |
| U2003 | Vehicle status and main wake-up information are inconsistent | 18 | Network |
| U2008 | If code is also present during self test, install a new head unit | 8 | Network |
| U2011 | DCDC_General communication fault | 16 | Network |
| U2014 | Valid as of model year 2014 | 9 | Network |
| U2015 | Control module - software boot | 9 | Network |
| U2016 | Valid up to model year 2016 | 8 | Network |
| U2023 | ISG LIN Communication | 12 | Network |
| U2100 | Initial Configuration Not Complete | 15 | Network |
| U2101 | DTC Mevcut | 15 | Network |
| U2202 | Diagnostic trouble code is still logged, contact Jaguar Dealer Technical Support | 11 | Network |
| U2300 | Central Configuration - Not Configured | 19 | Network |
| U2510 | Invalid Data Received from Multifunction Energy Storage Capacitor Control Module | 9 | Network |
| U260A | Detail for DTC-: Internal Failure | 2 | Network |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.