Fault code lookup

NetworkU1800

Serious

Severity: Serious - have it checked soon

Controller Area Network (CAN) Bus Communication

18 brands affected · Description from GM data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 18

BrandCodeDescriptionSystem
Mercedes-BenzU1800Default BrandNetwork
DaewooU1800Controller Area Network (CAN) Bus Communication BrandNetwork
DFFSU1800External temperature data failure BrandNetwork
EOBDU1800Mesaj alınmadı BrandNetwork
FordU1800No description available Network
GMU1800Controller Area Network (CAN) Bus Communication BrandNetwork
HoldenU1800Lost Communication with Fuel Injector Control Module BrandNetwork
HondaU1800No description available Network
IsuzuU1800No description available Network
MahindraU1800No description available Network
MazdaU1800No description available Network
MitsubishiU1800A/C ECU communication BrandNetwork
OpelU1800Controller Area Network (CAN) Bus Communication BrandNetwork
PeugeotU1800No description available Network
ProtonU1800A/C ECU communication BrandNetwork
SaabU1800Controller Area Network (CAN) Bus Communication BrandNetwork
MG (SAIC)U1800Wrong DLC in ABS / SCS Message BrandNetwork
SprinterU1800Default BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Related codes

Browse Uxxx codes or U180xx codes.

OpenDTC - independent fault code reference