Mahindra fault codes
3,424 codes · 41 vehicle records · 0 ECU records · 0 live-data parameters
Codes 3,424
| Code | Description | Brands | System |
|---|---|---|---|
| P1137 | Fuel Trim: Bank 1 (Add): System too Rich | 27 | Powertrain |
| P1138 | Short circuit to negative | 25 | Powertrain |
| P1139 | Short circuit to positive | 21 | Powertrain |
| P1140 | DME: Plausibility fault, air mass to pedal-tr. sensor (in eng.thr.) | 28 | Powertrain |
| P1141 | Load calculation cross check range/performance | 25 | Powertrain |
| P1142 | Fuel restriction condition | 21 | Powertrain |
| P1143 | Signal does not drop below threshold | 28 | Powertrain |
| P1144 | Signal does not exceed threshold | 21 | Powertrain |
| P1145 | Intake variable timing position sensor (bank 2) | 26 | Powertrain |
| P1146 | Heated O2 Sensor 2 | 23 | Powertrain |
| P1147 | Oxygen control (bank 2) system too lean | 20 | Powertrain |
| P1148 | Oxygen control (bank 2) system too rich | 24 | Powertrain |
| P1149 | Signal does not drop below threshold | 18 | Powertrain |
| P1150 | Wastegate control solenoid valve fault (bank 1) | 26 | Powertrain |
| P1151 | Lack of HO2S Switch - Sensor Indicates Lean (Bank 2 Sensor 1) | 28 | Powertrain |
| P1152 | Lack of HO2S Switch - Sensor Indicates Rich (Bank 2 Sensor 1) | 27 | Powertrain |
| P1153 | Short circuit to positive | 25 | Powertrain |
| P1154 | Heated Oxygen Sensor (HO2S) (bank 2 sensor 1) transition time ratio | 22 | Powertrain |
| P1155 | Wastegate control solenoid valve fault (bank 2) | 24 | Powertrain |
| P1156 | Short circuit to negative | 18 | Powertrain |
| P1157 | Short circuit to positive | 22 | Powertrain |
| P1158 | Mixture too rich | 23 | Powertrain |
| P1159 | Mixture too lean | 22 | Powertrain |
| P1160 | Mixture too rich | 25 | Powertrain |
| P1161 | Mixture too lean | 26 | Powertrain |
| P1162 | Fuel temperature sensor circuit short to ground | 20 | Powertrain |
| P1163 | Injector control | 27 | Powertrain |
| P1164 | Fuel temperature sensor range/performance/incorrect signal | 24 | Powertrain |
| P1165 | Inlet vortex valve vacuum control switch | 19 | Powertrain |
| P1166 | Bank 1, long term fuel trim, range 2 rich limit exceeded | 25 | Powertrain |
| P1167 | Heater coupling to signal | 29 | Powertrain |
| P1168 | Fuel tank temperature sensor low input | 23 | Powertrain |
| P1169 | Heater coupling to signal | 25 | Powertrain |
| P1170 | Capacitor 2 voltage | 28 | Powertrain |
| P1171 | Fuel System Lean During Acceleration | 31 | Powertrain |
| P1172 | Fuel System Rich During Acceleration | 23 | Powertrain |
| P1173 | Learning unsuccessful | 19 | Powertrain |
| P1174 | Cam Sensor Fault | 21 | Powertrain |
| P1175 | Pre-Injection Turned Off | 22 | Powertrain |
| P1177 | Bank2: O2 (Lambda) Correction Behind Catalyst: Control Limit Reached | 23 | Powertrain |
| P1179 | DME: Switch time, ox.sensor, bank 2 | 21 | Powertrain |
| P1180 | DME: Jump time, ox.sensor after cat.conv., bank 1 | 27 | Powertrain |
| P1181 | DME: Jump time, ox.sensor after cat.conv., bank 2 | 26 | Powertrain |
| P1182 | Brake circuit vacuum sensor signal failure | 23 | Powertrain |
| P1183 | Vacuum pump sensor failure | 24 | Powertrain |
| P1184 | DME: ACAT sensor, signal after SA, implausible, bank 1 | 24 | Powertrain |
| P1185 | DME: ACAT sensor, signal after SA, implausible, bank 2 | 23 | Powertrain |
| P1186 | DME: Heat output, ox.sensor after cat.conv., bank 1 | 25 | Powertrain |
| P1187 | DME: Heat output, ox.sensor after cat.conv., bank 2 | 23 | Powertrain |
| P1188 | DME: Fuel trim bank 1, permissible range exceeded | 23 | Powertrain |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.