Hyundai fault codes

7,974 codes · 345 vehicle records · 168 ECU records · 0 live-data parameters

Shared-name brands using this data:

Codes 7,974

Code	Description	Brands	System
B1319	sunload sensor short circuit	22	Body
B1320	The front wiper does not detect the stop signal for 10 consecutive seconds	22	Body
B1321	Neck heater load reduction	24	Body
B1322	Neck heater operation authorization failure	23	Body
B1323	The rear wiper detects the stop signal for 10 consecutive seconds	21	Body
B132300	The SRSCM sets DTC if there is any fault in Weight Classification System Sensor circuit or Wire Harness	1	Body
B1324	Heated seat power supply failure	21	Body
B1325	Front air conditioning blower control failure	26	Body
B1326	Passenger compartment air heating element 1 control failure	24	Body
B132600	The SRSCM sets DTC if there is short to ground in DFIS harness	2	Body
B1327	Passenger compartment air heating element 2 control failure	21	Body
B132700	The SRSCM sets DTC if there is short to power harness in DFIS harness	3	Body
B1328	Rear windshield and/or rearview mirror defog/defrost control failure	23	Body
B132800	The SRSCM sets DTC if there is any fault in Front Impact Sensor(FIS)-Drive	2	Body
B1329	High voltage safety fault in air conditioning circuit	19	Body
B132900	The SRSCM sets DTC if there is any error in communication between DFIS and SRSCM	2	Body
B1330	Battery voltage too low	17	Body
B133000	The SRSCM sets DTC if DFIS with wrong ID is detected	2	Body
B1331	right A/C discharge sensor fault	17	Body
B133100	The SRSCM sets DTC if there is short to ground in PFIS harness	2	Body
B1332	Driver seat adjustment authorization output failure	19	Body
B133200	The SRSCM sets DTC if there is short to power in PFIS harness	2	Body
B1333	Passenger seat adjustment authorization output failure	19	Body
B133300	The SRSCM sets DTC if there is any fault in Front Impact Sensor(FIS)-Drive	2	Body
B1334	Passenger control assembly out of range	18	Body
B133400	The SRSCM sets DTC if there is any error in communication between PFIS and SRSCM	2	Body
B1335	Device power 3 circuit current above threshold	17	Body
B133500	The SRSCM sets DTC if PFIS with wrong ID is detected	2	Body
B1336	memory seat module (MSM) current exceeds 81 amps	14	Body
B1337	Right rear window up control circuit current low	14	Body
B1338	Left Power Sliding Door Ratchet Switch	13	Body
B1339	Battery power 3 circuit open	14	Body
B1340	Right DRL circuit short	23	Body
B1341	Left position lamp circuit short	18	Body
B1342	ECU Is Defective	15	Body
B1344	Htr./def./a/c door movement fault	13	Body
B1345	Right Power Sliding Door Open/Close Switch	15	Body
B1346	Driver deployment loop resistance high	18	Body
B134600	The SRSCM sets DTC if the measured resistance value of DAB circuit is more than the threshold value.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while	2	Body
B1347	Right Power Sliding Door Position Sensor	16	Body
B134700	The SRSCM sets DTC if the measured resistance value of DAB circuit is less than the threshold value*In this case, SRSCM checks if there's any fault in circuit by sending current for a while	2	Body
B1348	Right Power Sliding Door Lock	15	Body
B134800	The SRSCM sets DTC if there is a short to ground in DAB harness*In this case, SRSCM checks if there's any fault in circuit by sending current for a while	2	Body
B1349	Device ground 1 circuit open	16	Body
B134900	The SRSCM sets DTC if there is a short to power in DAB harness*In this case, SRSCM checks if there's any fault in circuit by sending current for a while	2	Body
B1351	Differential Control Module. Rear Side. Actuator B. Position Sensor. Correlation Error	16	Body
B1352	Ignition Key-In Circuit Failure	18	Body
B135200	The SRSCM sets DTC if the measured resistance value of PAB circuit is more than the threshold value.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while	3	Body
B1353	Passenger frontal deployment loop (stage 1) open	18	Body
B135300	The SRSCM sets DTC if the measured resistance value of PAB circuit is less than the threshold value.*In this case, SRSCM checks if there's any fault in circuit by sending current for a while	2	Body

Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.