DENZA fault codes
Coverage shown is BYD data: 7,677 codes · 97 vehicle records · 71 ECU records · 0 live-data parameters.
DENZA shares fault-code data with BYD. Data may not cover DENZA-specific systems.
Codes 7,677
| Code | Description | Brands | System |
|---|---|---|---|
| U1441 | Dynamic Range Error | 11 | Network |
| U1442 | Dynamic Range Error | 10 | Network |
| U1443 | Dynamic Range Error | 10 | Network |
| U1460 | Invalid Data Received (ABS/ESP Control Module) | 4 | Network |
| U1500 | OMI not initialized | 17 | Network |
| U1600 | MBUSY open | 22 | Network |
| U1601 | Frequency | 28 | Network |
| U1602 | MDATA open | 18 | Network |
| U1603 | Clutch signal invalid value | 14 | Network |
| U1604 | R gear signal is invalid | 14 | Network |
| U1605 | MSCK short | 12 | Network |
| U1606 | ECU Application Software Data 1 Missing or Corrupted | 15 | Network |
| U1700 | SCU message lost | 24 | Network |
| U1701 | ECM message lost | 20 | Network |
| U1702 | ESC message lost | 19 | Network |
| U1703 | CAN shift lever signal error | 19 | Network |
| U1704 | Dr.P/W SW CAN Timeout/Not equip | 17 | Network |
| U1705 | CAN brake signal error | 19 | Network |
| U1706 | F-CAN Malfunction (EVCC - Ethernet and OTA Unit) | 21 | Network |
| U1707 | CAN throttle signal error | 16 | Network |
| U1708 | VCU message lost | 12 | Network |
| U1709 | CAN vehicle speed error | 9 | Network |
| U170A | CAN front left speed error | 7 | Network |
| U170B | CAN front right speed error | 7 | Network |
| U170C | CAN rear left speed error | 7 | Network |
| U170D | CAN rear right wheel speed error | 1 | Network |
| U170E | CAN engine speed error | 1 | Network |
| U1F02 | Night vision ECU not received light intensity value signal from BCM | 8 | Network |
| U1F03 | Night vision ECU not receiving low beam ON/OFF signal from combination switch | 8 | Network |
| U1F04 | Night vision light not received ON/OFF request signal from head up display | 1 | Network |
| U1F05 | Head up display not received signal from multimedia | 8 | Network |
| U1F06 | Head up display not received signal from night vision system | 8 | Network |
| U200A | recheck for -96 | 3 | Network |
| U200B | Control Module Internal Power B | 3 | Network |
| U200E | Control module output power B | 3 | Network |
| U200F | Communication fault with SECU | 3 | Network |
| U2022 | Lost communication with panoramic video ECU | 9 | Network |
| U209B | Communication fault with sunroof motor | 7 | Network |
| U209C | Communication fault with sun blind motor | 7 | Network |
| U209D | Lost communication with right front window anti-pinch motor | 7 | Network |
| U209E | Lost communication with left rear window anti-pinch motor | 7 | Network |
| U209F | Lost communication with right rear window anti-pinch motor | 7 | Network |
| U20A0 | Communication with front left window anti-pinch motor fault | 1 | Network |
| U20B0 | BIC1 CAN communication timeout fault | 1 | Network |
| U20B1 | BIC2 CAN communication timeout fault | 1 | Network |
| U20B2 | BIC3 CAN communication timeout fault | 1 | Network |
| U20B3 | BIC4 CAN communication timeout fault | 1 | Network |
| U20B4 | BIC5 CAN communication timeout fault | 1 | Network |
| U20B5 | BIC6 CAN communication timeout fault | 1 | Network |
| U20B6 | BIC7 CAN communication timeout fault | 1 | Network |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.