Fault code lookup

NetworkU1603

Serious

Severity: Serious - have it checked soon

Clutch signal invalid value

14 brands affected · Description from DFFS data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 14

BrandCodeDescriptionSystem
BYDU1603MDATA short BrandNetwork
CheryU1603MDATA short BrandNetwork
DFFSU1603Clutch signal invalid value BrandNetwork
DFFXU1603MDATA short BrandNetwork
EOBDU1603MDATA īss BrandNetwork
GeelyU1603MDATA short BrandNetwork
Great WallU1603MDATA short BrandNetwork
HafeiU1603MDATA short BrandNetwork
HondaU1603No description available Network
MaseratiU1603No description available Network
MitsubishiU1603MDATA short BrandNetwork
PeugeotU1603No description available Network
ProtonU1603MDATA short BrandNetwork
MG (SAIC)U1603Right Slave internal Error BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 2

These 7-character codes are manufacturer-specific variants of U1603 and may be reported by some scan tools.

BrandCodeDescriptionSystem
SsangYongU160300Vehicle Control Unit (VCU) communication Lost BrandNetwork
SsangYongU160387CAN communication: right rear Blind Spot Detection (BSD) local CAN - timeout BrandNetwork

6Related codes

Browse Uxxx codes or U160xx codes.

OpenDTC - independent fault code reference