Chery fault codes
8,313 codes · 74 vehicle records · 0 ECU records · 0 live-data parameters
Codes 8,313
| Code | Description | Brands | System |
|---|---|---|---|
| B1A21 | Passenger's air bag deployment control - stage 1 - short circuit to ignition loop | 12 | Body |
| B1A22 | Right Rear Tire Pressure Sensor Data Error | 12 | Body |
| B1A23 | Passenger's air bag deployment control - stage 2 - short circuit to ignition loop | 11 | Body |
| B1A24 | Panorama controller | 12 | Body |
| B1A26 | AVM not calibrated missing calibration information | 11 | Body |
| B1A40 | Right LED circuit short to ground | 5 | Body |
| B1A41 | Left side (pelvic) 2 - short circuit to ignition loop | 5 | Body |
| B1A43 | System - temperature too high | 4 | Body |
| B1A44 | Supply voltage - circuit voltage below lower limit | 4 | Body |
| B1A45 | Auxiliary radar - conventional memory fault | 4 | Body |
| B1A46 | Primary radar - conventional memory fault | 4 | Body |
| B1A47 | Lost communication with auxiliary radar - message lost | 5 | Body |
| B1A48 | Primary/auxiliary radar self-calibration error - no such type of fault information | 6 | Body |
| B1B00 | Front left probe not working properly | 11 | Body |
| B1B01 | Front right probe not working properly | 11 | Body |
| B1B02 | Left rear probe not working normally | 10 | Body |
| B1B03 | Rear right probe not working properly | 12 | Body |
| B1B04 | Left rear middle probe not working normally | 14 | Body |
| B1B40 | Main control initialization failed | 5 | Body |
| B1B41 | Left Front Outer Sensor Power Circuit | 5 | Body |
| B1B42 | Mode switching failed | 5 | Body |
| B1B43 | Left Rear Inner Sensor Power Circuit | 4 | Body |
| B1B50 | Image acquisition abnormal | 6 | Body |
| B1B51 | Left Rear Inner Sensor Power Circuit | 7 | Body |
| B1B52 | WiFi module abnormal | 7 | Body |
| B1B53 | G sensor collision induction abnormal | 6 | Body |
| B1B54 | Memory card writing speed low/severe fragmentation/damaged | 7 | Body |
| B1E10 | Battery voltage too low | 4 | Body |
| B2000 | Internal control module memory check sum error; Component failure | 18 | Body |
| B2001 | Left Electric Sliding Door Control Unit Fault DTC Storage Unit: Left Electric Sliding Door Control Unit Possible Fault Area Left Electric Sliding Door Control Unit Fault | 16 | Body |
| B2002 | Voltage too high | 17 | Body |
| B2011 | Timed valve | 11 | Body |
| B2012 | Crash record locked | 3 | Body |
| B2014 | Boost pressure sensor | 5 | Body |
| B2021 | Driver front airbag (stage 1) short to ground | 9 | Body |
| B2022 | Driver front airbag (stage 1) short to power | 11 | Body |
| B2023 | Driver front airbag (stage 1) resistance too low | 10 | Body |
| B2024 | Driver front airbag (stage 1) resistance too high | 7 | Body |
| B2031 | Tilt hall sensor or angle adjustment motor circuit fault | 11 | Body |
| B2032 | Axial hall sensor or axial adjustment motor circuit fault | 10 | Body |
| B2033 | ECU power supply fault | 13 | Body |
| B2034 | Column not initialized | 11 | Body |
| B2041 | Driver side airbag short to ground | 6 | Body |
| B2042 | Loss of ABS/TCS communications | 14 | Body |
| B2043 | Driver side airbag resistance too low | 7 | Body |
| B2044 | Driver side airbag resistance too high | 5 | Body |
| B2051 | Driver side curtain airbag short to ground | 10 | Body |
| B2052 | Driver side curtain airbag short to power | 13 | Body |
| B2053 | Driver side curtain airbag resistance too low | 11 | Body |
| B2054 | Driver side curtain airbag resistance too high | 9 | Body |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.